Go-Video DV2130 manual One-Touch Recording OTR, Activate OTR, Set Record Speed

One-Touch Recording (OTR)

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 9 hours and 30 minutes at the touch of

abutton.

1Start Recording

Follow the instructions on page 55 to begin recording.

2Activate OTR

While in Record mode, press the REC button again to activate One-Touch Recording (OTR).

•Record length 0:30 appears on the On-Screen Display and the DVD+VCR will record for exactly 30 minutes.

3Add Recording Time

Continue pressing REC to add recording time in 30 minute increments up to 4 hours.

•The DVD+VCR stops recording automatically when the recording time has elapsed. If you press POWER during OTR recording, the DVD+VCR will power off automatically when the recording time has elapsed.

RECORD 0:00:00

SP

OTR 0:30	0:30 - 1:00 - ...
	- 9:00 - 9:30
0:00:00
SP

Record Speed

You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120 tape.

1Start Recording

Follow the Basic Recording instructions on page 55.

2Set Record Speed

Press the SP/SLP button on the remote control to set the Record Speed to one of the following options:

•SP – Standard Play, for best quality.

•SLP – Super Long Play, for maximum recording time (3 times SP).

NOTE: The selected Record Speed will appear on the front panel display and on-screen display.

Maximum Recording Time - SP vs. SLP

Tape Length	SP (Standard Play)	SLP (Super Long Play)
T-120	2 hrs	6 hrs
T-160	2hrs 40 mins	8 hrs
T-180	3 hrs	9 hrs

		T	U	VI
	E			E
R				W
				ENTER

2

REC	SP/SLP	CLEAR	DISC MENU
SUBTITLE	MODE	ANGLE	MARK
LAST CH	REPEAT	TIMER	SEARCH/IDX

57