How to Set a Timer Recording
Language : English
|
|
| Front Display | : Auto |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer Program
If you want to set
the timer program,
press the ENTER key
No | Ch | Start | End | Date Speed |
1 |
| : | : |
|
2 |
| : | : |
|
3 |
| : | : |
|
4 |
| : | : |
|
5 |
| : | : |
|
6 |
| : | : |
|
7 |
| : | : |
|
|
|
|
|
|
|
|
|
|
|
Insert a blank videotape into the VCR deck. Be sure to leave the Record Safety Tab intact. With the Timer Recording function, you can program up to 7 events at a time to record up to a month in advance.
To Begin Setting the Timer Recording,
•Turn on your DVD+VCR, and
•Turn on your TV.
•Set the TV to channel 3, 4 or Line.
1Open “Initial Setup” menu
Press the SETUP button or the TIMER button while the DVD is in Stop or Play mode.
2Select “PROG”
Use the / buttons to highlight “PROG” then press the ENTER button.
3Select Channel Number
Use the and / buttons to set the desired channel. Press the button to move to the next setting.
4Set “Time/Date/Speed”
Repeat Step 3 above to set the start time, end time, date and record speed. The date can be set for One Time, Daily or Weekly recording. See Step 7 below.
5Save “Timer Recording”
Press the RETURN button to finish setting the timer recording. Stop the DVD+VCR or turn the power off. The timer indicator will light on the front panel display. The DVD+VCR will automatically turn on and begin recording at the time you set. To stop the timer recording, press STOP ■ twice.
6Auto Speed Select
If the videotape is not long enough for a timer recording in the SP mode, set the recording tape speed to “AUTO”. Recording will start in the SP mode. If the tape is not long enough, the record speed will automatically change from SP mode to SLP mode.
7Daily/Weekly Date Programming
Weekly [SUN’S~SAT’S]: Records the TV program on the same channel at the same time every week.
Daily [MO - FR] : Records the TV program on the same channel at the same time every day Monday through Friday.
58