JVC LPT0679-001A specifications Some Do’s And Don’ts On The Safe Use Of Equipment, Above ALL

Page 3

3

Some Do’s And Don’ts On The Safe Use Of Equipment

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON’T remove any fixed cover as this may expose dangerous voltages.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your hearing. DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.

Overheating will cause damage and shorten the life of the equipment.

DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s approved stand or legs with the fixings provided according to the instructions.

DON’T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL...

NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

Image 3
Contents Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorderAbove ALL Some Do’s And Don’ts On The Safe Use Of EquipmentFront View Do not remove it Rear ViewFront Display Panel PDC* Indicator  pgOn the tape BeginningEnd ON-SCREEN Display for VHS deckVHS Remote ControlRemote Control LCD How To UseCheck Contents Connect the recorder to mains Recorder and the TV’s 21-pin Scart connectorSituate the recorder Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Before starting, make sure of the following Auto Set UpPerform Auto Set Up Turn on the recorderPerform Preset Download Press rt to select CH - and press OK or eOn the on-screen display  pg , Just Clock Just ClockDirect Rec NexTView Link TV Auto Power OnLink Functions VCR Auto StandbyMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite ControllerSetting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testingVHS deck Basic PlaybackPause/Resume recording Choose a programmeSet the tape speed Start recordingSlow Motion Pause during playbackActivate frame-by-frame playback Skip Search High-Speed Turbo SearchVariable Speed Search Index SearchStop Repeat Playback Next Function MemoryRepeat Playback Activate Repeat PlaybackNtsc Playback Adjust the tracking manuallySoundtrack Selection Manual TrackingAccidental erasure prevention Instant Timer Recording ITREngage the ITR mode Recording Resume FunctionPress 0000 before starting recording or playback Reset the counterTape Remaining Time Set the counter displayLocate the start point Engage the Record-Pause modeRetake Receiving Stereo and Bilingual ProgrammesRecording PlaybackFind the programme start point DV deckSelect the DV deck Press DVDV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback or still, press 5 for forward high-speed For forward high-speed searchDuring playback, turn the JOG dial quickly to the right Search, or 3 for reverse high-speed searchRecording Features See Audio REC on Time CodeTransmit the PlusCode number Access the PlusCode displaySelect the deck Enter the PlusCode numberReturn to the normal screen Set the PDC modeEngage the recorder’s timer mode Check the programme dataEnter the programme start time Express Timer ProgrammingAccess the PlusCode screen Access the Programme screenEnter the channel position To Timer-Record Weekly Or Daily SerialsPDC Recording Enter the programme dateFor the VHS deck Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelPage Return to the timer mode Disengage the timer modeAccess the Programme screen/display Cancel or change a programmeOverlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifySelect the dubbing direction Tape DubbingFrom DV to VHS Dubbing An Entire Cassette Load cassettesDubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p Pause dubbing From DV to VHSLocate the start point on the DV deck Prepare the VHS deck for dubbingPrepare the DV deck for dubbing VHS playback indicator and DV recording indicator lightFrom VHS to DV Locate the start point on the VHS deckStart the camcorder Set the recorder’s input modeSelect the recording deck Set the edit mode. VHS deck onlyPlayer If the camcorder has no S-VIDEO output connectorSimultaneous Dubbing Recorder Video inputStart the source player Set the input mode of recording deckAnother Video Recorder Advantages of S-VHS video recordersRecorder Another recorderPlayer Recorder Press rt to move Access the Main Menu screenSelect the input mode for the Video Video connector Select SettingVHS F-1 Input Setting Decoder connectorPre-recorded tape Audio-dubbed tape CD player, etc Audio DubbingVHS Audio Dubbing DV Audio DubbingEngage the Audio Dubbing mode End Audio DubbingPress A.DUB Source tape DV Insert Editing SP mode onlyInsert Editing VHS Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing VHS deck only Prepare the recording cassettePress R.A.EDIT. The R.A.Edit screen appears Access the R.A.Edit screenSelect the programme Insert a VHS or S-VHS cassette and a Mini DV cassetteEnd Random Assemble Editing Locate the end pointPrepare the source tape Start Random Assemble EditingChange the recorder’s code Change the remote control codeSet the remote control code Display the codeOperate the TV TV Multi-Brand Remote ControlTV PR +/-, TV %+/- Volume, TV Muting, number keys Set the TV brand codeSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver About DV IN/OUT connector To DV in connectorDigital printer Aerial ConnectorAerial Pin Scart connector Mains outletOutdoor unit Satellite cable Speaker Television Make connectionsFM tuner CD player Stereo amplifier AUX in or Tape MonitorSelect the mode setting Mode SetAccess the Mode Set screen Select the modeControl, or press 7 on the recorder Mode SETPowered back on ScreenVHS Mode SET VHS Mode SET We recommend that you set Digital TBC/NR to on when Using this video recorder as the source player for editingRental cassettes Picture reproduction is also linked to this functionDV Mode SET Perform Auto Channel Set Tuner also by Preset Download  pgTuner Set Auto Channel SetView the Confirmation screen Manual Channel Set Delete a channel Delete a ChannelChange Station Channel Position Select the itemSet Stations B Set Stations aPress OK twice. The Manual Channel Set screen appears Access the Manual Channel Set screenPerform tuning Select the channel to fine-tuneStation Name TV Station And ID ListTV Station Channel Number Guide Clock Set Access the Clock Set screenStart the clock operation Set the date and timeSet Just Clock Set the source channel position for clock dataEnter the Guide Program number Video Plus+ System SetupGuide Program Number Set Guide Program NumberConnect the mains power cord No power is supplied to the recorderTab removed Tab was removed Recording cannot be startedThere is no cassette loaded, or Adhesive tape, cover the hole whereDV deck VHS deckTurn off the recorder once and connect Not connected between TVTurn off the recorder or the connected Timer Recording PlaybackRecording Scan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Hz to 20,000 Hz Hi-Fi audio Maximum recording time Preset Download Random Assemble Editing Auto Channel Set Auto Set UpClock Set Connecting To a Printer Express Timer ProgrammingMemo