JVC LPT0679-001A Set the recorder’s input mode, Select the recording deck, Start the camcorder

Page 48

48	EDITING (cont.)

Edit From A Camcorder

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

You can use a camcorder as the source player and your recorder as the recording deck.

You can perform digital dubbing if you connect a device such as a camcorder which has a DV IN/OUT connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

A Make connections.

AIf the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and S-VIDEO OUT connectors to the recorder’s front panel AUDIO and S-VIDEO input connectors.

CIf the camcorder has a DV IN/OUT connector ...

... connect the camcorder’s DV IN/OUT connector to

the recorder’s DV IN/OUT connector.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder’s instruction manual for operating procedure.

B Set the recorder’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1”.

●When using the VHS deck as the recording deck, set “VHS F-1 INPUT” to “VIDEO” for the AUDIO/VIDEO input connectors,

or “S-VIDEO” for the AUDIO/S-VIDEO input connectors, depending on the connectors being used ( pg. 53).

C Select the recording deck.

Press VHS or DV.

●To edit from a camcorder to the VHS deck through the DV IN/ OUT connector, press .

●To edit from a camcorder to the DV deck through the S-VIDEO (VIDEO)/AUDIO input connectors, press .

D Set the edit mode. (VHS deck only)

See “PICTURE CONTROL” on page 68.

E Start the camcorder.

Engage the Play mode of the camcorder.

F Start the recorder.

Engage the Record mode of the recorder.

Image 48

Contents Video Cassette Recorder Do not place the recorder Do not expose the apparatus to dripping or splashingSome Do’s And Don’ts On The Safe Use Of Equipment Above ALLFront View Rear View Do not remove itPDC* Indicator pg Front Display PanelON-SCREEN Display for VHS deck On the tape BeginningEndRemote Control VHSHow To Use Remote Control LCDCheck Contents Recorder and the TV’s 21-pin Scart connector Situate the recorderConnect the recorder to TV Connect the recorder to mains8To connect to a TV with S-VIDEO/AUDIO in connectors Aerial connectorVideo Connection Auto Set Up Perform Auto Set UpTurn on the recorder Before starting, make sure of the followingPerform Preset Download Press rt to select CH - and press OK or eOn the on-screen display Just Clock pg , Just ClockNexTView Link TV Auto Power On Link FunctionsVCR Auto Standby Direct RecInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel Select the satellite receiver’s channel for testing Check the result of the testBasic Playback VHS deckChoose a programme Set the tape speedStart recording Pause/Resume recordingSlow Motion Pause during playbackActivate frame-by-frame playback High-Speed Turbo Search Variable Speed SearchIndex Search Skip SearchNext Function Memory Repeat PlaybackActivate Repeat Playback Stop Repeat PlaybackAdjust the tracking manually Soundtrack SelectionManual Tracking Ntsc PlaybackInstant Timer Recording ITR Engage the ITR modeRecording Resume Function Accidental erasure preventionReset the counter Tape Remaining TimeSet the counter display Press 0000 before starting recording or playbackEngage the Record-Pause mode RetakeReceiving Stereo and Bilingual Programmes Locate the start pointPlayback RecordingDV deck Select the DV deckPress DV Find the programme start pointDV recording indicator turns off PLAYBACK/RECORDING on DV Deck For forward high-speed search During playback, turn the JOG dial quickly to the rightSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speedRecording Features Time Code See Audio REC onAccess the PlusCode display Select the deckEnter the PlusCode number Transmit the PlusCode numberSet the PDC mode Engage the recorder’s timer modeCheck the programme data Return to the normal screenExpress Timer Programming Access the PlusCode screenAccess the Programme screen Enter the programme start timeTo Timer-Record Weekly Or Daily Serials PDC RecordingEnter the programme date Enter the channel positionEnter the programme mode Before performing the 24 Hour Express Timer ProgrammingSet the programme start/stop time and channel For the VHS deckPage Disengage the timer mode Access the Programme screen/displayCancel or change a programme Return to the timer modeCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenTape Dubbing From DV to VHS Dubbing An Entire CassetteLoad cassettes Select the dubbing directionDubbing direction indicator VHS lights From VHS to DV Dubbing An Entire CassettePress DV, then press SP/LP p From DV to VHS Locate the start point on the DV deckPrepare the VHS deck for dubbing Pause dubbingVHS playback indicator and DV recording indicator light From VHS to DVLocate the start point on the VHS deck Prepare the DV deck for dubbingSet the recorder’s input mode Select the recording deckSet the edit mode. VHS deck only Start the camcorderIf the camcorder has no S-VIDEO output connector Simultaneous DubbingRecorder Video input PlayerSet the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source playerRecorder Another recorderPlayer Recorder Access the Main Menu screen Press rt to moveSelect Setting VHS F-1 Input SettingDecoder connector Select the input mode for the Video Video connectorAudio Dubbing VHS Audio DubbingDV Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etcEngage the Audio Dubbing mode End Audio DubbingPress A.DUB DV Insert Editing SP mode only Insert EditingVHS Insert Editing Source tapeEngage the Insert Editing mode AV Insert Editing VHS deck onlyPrepare the recording cassette Start EditingAccess the R.A.Edit screen Select the programmeInsert a VHS or S-VHS cassette and a Mini DV cassette Press R.A.EDIT. The R.A.Edit screen appearsLocate the end point Prepare the source tapeStart Random Assemble Editing End Random Assemble EditingChange the remote control code Set the remote control codeDisplay the code Change the recorder’s codeTV Multi-Brand Remote Control TV PR +/-, TV %+/- Volume, TV Muting, number keysSet the TV brand code Operate the TVSatellite Receiver Multi-Brand Remote Control Set the satellite receiver brand codeOperate the satellite receiver About DV IN/OUT connector To DV in connectorDigital printer Aerial ConnectorAerial Pin Scart connector Mains outletOutdoor unit Satellite cable Make connections FM tuner CD player Stereo amplifierAUX in or Tape Monitor Speaker TelevisionMode Set Access the Mode Set screenSelect the mode Select the mode settingMode SET Powered back onScreen Control, or press 7 on the recorderVHS Mode SET VHS Mode SET Using this video recorder as the source player for editing Rental cassettesPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on whenDV Mode SET Tuner also by Preset Download pg Tuner SetAuto Channel Set Perform Auto Channel SetView the Confirmation screen Manual Channel Set Delete a Channel Change Station Channel PositionSelect the item Delete a channelSet Stations a Set Stations BAccess the Manual Channel Set screen Perform tuningSelect the channel to fine-tune Press OK twice. The Manual Channel Set screen appearsTV Station And ID List Station NameTV Station Channel Number Guide Access the Clock Set screen Clock SetSet the date and time Set Just ClockSet the source channel position for clock data Start the clock operationVideo Plus+ System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberNo power is supplied to the recorder Connect the mains power cordRecording cannot be started There is no cassette loaded, orAdhesive tape, cover the hole where Tab removed Tab was removedVHS deck DV deckTurn off the recorder once and connect Not connected between TVTurn off the recorder or the connected Timer Recording PlaybackRecording Scan system Lines VHS Lines S-VHS Frequency range Hz to 10,000Hz to 20,000 Hz Hi-Fi audio Maximum recording time Auto Channel Set Auto Set Up Clock Set Connecting To a PrinterExpress Timer Programming Preset Download Random Assemble EditingMemo