JVC LPT0679-001A specifications VHS deck, DV deck

Page 85

 

 

 

85

TIMER RECORDING

 

 

 

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

Timer recording won’t work.

The clock and/or the timer have been set

Re-perform the clock and/or timer

 

 

incorrectly.

settings.

 

 

The timer is not engaged.

Press # and confirm that “#” is displayed

 

 

 

on the front display panel.

 

 

Timer recording may not work when the

Set the channel position other than “F-1”

 

 

recorder’s input mode is set to “F-1” for

before engaging to Timer-Standby mode.

 

 

recording on the DV deck.

 

 

 

 

 

2.

Timer programming is not possible.

Timer recording is in progress.

Timer programming can’t be performed

 

 

 

while a timer recording is in progress.

 

 

 

Wait until it finishes.

 

 

 

 

3.

“#” and “[” on the front display

The timer is engaged but there’s no

For the VHS deck

 

panel won’t stop blinking.

cassette loaded.

Insert a VHS (or S-VHS) cassette with the

 

 

 

record safety tab intact, or cover the hole

 

 

 

using adhesive tape.

 

 

 

For the DV deck

 

 

 

Insert a Mini DV cassette with the erase

 

 

 

protection switch set to “REC”.

 

 

The end of the tape was reached during

The programme may not have been

 

 

timer recording.

recorded in its entirety. Next time make

 

 

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

VHS deck

 

 

 

The loaded cassette has had its record

Remove the cassette and cover the hole

 

 

safety tab removed.

with adhesive tape, or insert a cassette

 

 

 

with the record safety tab intact.

 

 

DV deck

 

 

 

The loaded cassette has had its erase

Remove the cassette and set the erase

 

 

protection switch set to “SAVE”.

protection switch to “REC”.

 

 

 

 

4.

“#” blinks for 10 seconds and the

# has been pressed when there are no

Check the programmed data and re-

 

Timer mode is disengaged.

programs in memory, or the timer

program as necessary, then press # again.

 

 

record information has been

 

 

 

programmed incorrectly.

 

 

 

 

 

5.

The VIDEO Plus+ system does not

The recorder’s channel positions have

Refer to “Guide Program Number Set”

 

timer-record properly.

been set incorrectly.

( pg. 82) and re-perform the procedure.

 

 

 

 

6.

The power shuts off and “[” won’t

The end of the tape was reached during

The programme may not have been

 

stop blinking.

Instant Timer Recording.

recorded in its entirety. Next time make

 

 

 

sure you have enough time on the tape to

 

 

 

record the entire programme.

 

 

 

 

Image 85
Contents Video Cassette Recorder Do not expose the apparatus to dripping or splashing Do not place the recorderAbove ALL Some Do’s And Don’ts On The Safe Use Of EquipmentFront View Do not remove it Rear ViewFront Display Panel PDC* Indicator  pgOn the tape BeginningEnd ON-SCREEN Display for VHS deckVHS Remote ControlRemote Control LCD How To UseCheck Contents Situate the recorder Recorder and the TV’s 21-pin Scart connectorConnect the recorder to TV Connect the recorder to mainsAerial connector 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection Perform Auto Set Up Auto Set UpTurn on the recorder Before starting, make sure of the followingPress rt to select CH - and press OK or e Perform Preset DownloadOn the on-screen display  pg , Just Clock Just ClockLink Functions NexTView Link TV Auto Power OnVCR Auto Standby Direct RecSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel Check the result of the test Select the satellite receiver’s channel for testingVHS deck Basic PlaybackSet the tape speed Choose a programmeStart recording Pause/Resume recordingPause during playback Slow MotionActivate frame-by-frame playback Variable Speed Search High-Speed Turbo SearchIndex Search Skip SearchRepeat Playback Next Function MemoryActivate Repeat Playback Stop Repeat PlaybackSoundtrack Selection Adjust the tracking manuallyManual Tracking Ntsc PlaybackEngage the ITR mode Instant Timer Recording ITRRecording Resume Function Accidental erasure preventionTape Remaining Time Reset the counterSet the counter display Press 0000 before starting recording or playbackRetake Engage the Record-Pause modeReceiving Stereo and Bilingual Programmes Locate the start pointRecording PlaybackSelect the DV deck DV deckPress DV Find the programme start pointDV recording indicator turns off PLAYBACK/RECORDING on DV Deck During playback, turn the JOG dial quickly to the right For forward high-speed searchSearch, or 3 for reverse high-speed search During playback or still, press 5 for forward high-speedRecording Features See Audio REC on Time CodeSelect the deck Access the PlusCode displayEnter the PlusCode number Transmit the PlusCode numberEngage the recorder’s timer mode Set the PDC modeCheck the programme data Return to the normal screenAccess the PlusCode screen Express Timer ProgrammingAccess the Programme screen Enter the programme start timePDC Recording To Timer-Record Weekly Or Daily SerialsEnter the programme date Enter the channel positionBefore performing the 24 Hour Express Timer Programming Enter the programme modeSet the programme start/stop time and channel For the VHS deckPage Access the Programme screen/display Disengage the timer modeCancel or change a programme Return to the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenFrom DV to VHS Dubbing An Entire Cassette Tape DubbingLoad cassettes Select the dubbing directionFrom VHS to DV Dubbing An Entire Cassette Dubbing direction indicator VHS lightsPress DV, then press SP/LP p Locate the start point on the DV deck From DV to VHSPrepare the VHS deck for dubbing Pause dubbingFrom VHS to DV VHS playback indicator and DV recording indicator lightLocate the start point on the VHS deck Prepare the DV deck for dubbingSelect the recording deck Set the recorder’s input modeSet the edit mode. VHS deck only Start the camcorderSimultaneous Dubbing If the camcorder has no S-VIDEO output connectorRecorder Video input PlayerAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerAnother recorder RecorderPlayer Recorder Press rt to move Access the Main Menu screenVHS F-1 Input Setting Select SettingDecoder connector Select the input mode for the Video Video connectorVHS Audio Dubbing Audio DubbingDV Audio Dubbing Pre-recorded tape Audio-dubbed tape CD player, etcEnd Audio Dubbing Engage the Audio Dubbing modePress A.DUB Insert Editing DV Insert Editing SP mode onlyVHS Insert Editing Source tapeAV Insert Editing VHS deck only Engage the Insert Editing modePrepare the recording cassette Start EditingSelect the programme Access the R.A.Edit screenInsert a VHS or S-VHS cassette and a Mini DV cassette Press R.A.EDIT. The R.A.Edit screen appearsPrepare the source tape Locate the end pointStart Random Assemble Editing End Random Assemble EditingSet the remote control code Change the remote control codeDisplay the code Change the recorder’s codeTV PR +/-, TV %+/- Volume, TV Muting, number keys TV Multi-Brand Remote ControlSet the TV brand code Operate the TVSet the satellite receiver brand code Satellite Receiver Multi-Brand Remote ControlOperate the satellite receiver To DV in connector About DV IN/OUT connectorDigital printer Pin Scart connector Mains outlet Aerial ConnectorAerialOutdoor unit Satellite cable FM tuner CD player Stereo amplifier Make connectionsAUX in or Tape Monitor Speaker TelevisionAccess the Mode Set screen Mode SetSelect the mode Select the mode settingPowered back on Mode SETScreen Control, or press 7 on the recorderVHS Mode SET VHS Mode SET Rental cassettes Using this video recorder as the source player for editingPicture reproduction is also linked to this function We recommend that you set Digital TBC/NR to on whenDV Mode SET Tuner Set Tuner also by Preset Download  pgAuto Channel Set Perform Auto Channel SetView the Confirmation screen Manual Channel Set Change Station Channel Position Delete a ChannelSelect the item Delete a channelSet Stations B Set Stations aPerform tuning Access the Manual Channel Set screenSelect the channel to fine-tune Press OK twice. The Manual Channel Set screen appearsStation Name TV Station And ID ListTV Station Channel Number Guide Clock Set Access the Clock Set screenSet Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationGuide Program Number Set Video Plus+ System SetupGuide Program Number Enter the Guide Program numberConnect the mains power cord No power is supplied to the recorderThere is no cassette loaded, or Recording cannot be startedAdhesive tape, cover the hole where Tab removed Tab was removedDV deck VHS deckNot connected between TV Turn off the recorder once and connectTurn off the recorder or the connected Playback Timer RecordingRecording Lines VHS Lines S-VHS Frequency range Hz to 10,000 Scan systemHz to 20,000 Hz Hi-Fi audio Maximum recording time Clock Set Connecting To a Printer Auto Channel Set Auto Set UpExpress Timer Programming Preset Download Random Assemble EditingMemo