JVC HR-A56U Adjusting tracking condition, Selecting monitor sound, Automatic operations after

Page 17

EN 17

D Adjusting tracking condition

Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.

You can also use the manual tracking during slow motion playback ( pg. 23).

1 Activate manual tracking

Press CH 5 and ° on the front panel at the same time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 and ° (or CH + and on the Remote). Press it briefly for a fine adjustment, or press and hold for coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.

3 Reactivate automatic tracking

Press CH 5 and ° on the front panel at the same time. The automatic tracking becomes active again. “AUTO PICTURE” will momentarily flash on the TV.

E Selecting monitor sound

Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows:

 

 

HI-FI

 

 

 

HI-FI L

 

 

HI-FI R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORM

 

 

 

 

NORM

 

 

 

HI-FI

 

 

 

 

 

 

 

 

 

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back. NORM:Sound on the normal track is played back. NORM HI-FI:

Both sounds on the Hi-Fi track and normal track are mixed and played back.

Note:

The above indication appears when “SUPERIMPOSE” is set to “ON” ( pg. 29), though the monitor sound changes in sequence.

If the tape being played back has no Hi-Fi sound track, the normal sound track will be heard regardless of this setting.

If RF connection ( pg. 7) is used for viewing pictures on the TV, sound will be monaural even though you select “HI-FI”. You can also use the menu to select your desired monitor sound. ( pg. 31)

F Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2 seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

Image 17
Contents HR-A56U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cable Flat feeder Matching transformerSituate VCR Check contentsConnect VCR to TV Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Access Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect host channel Select time zoneSelect D.S.T. mode Setting clock manually12 EN Manual Clock SetPerform Auto Channel Set Tuner SettingAccess Tuner Set screen Access Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsStart playback Basic PlaybackLoad a cassette 16 EN Basic Playback FeaturesChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionSelecting monitor sound Access distant code Locating beginning of timer18 EN Locating beginningSelect recording channel Basic RecordingSet tape speed Start recording20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Other useful functions for recording22 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback24 EN Express Timer ProgramingTo timer-record daily Monday-Friday or weekly serials Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Press SP/EP to set the tape speed26 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Change setting Useful Function Settings28 EN Select FunctionAuto Picture Auto TimerPicture Control Superimpose30 EN Auto SP = EP TimerVideo Stabilizer Blue BackAudio Monitor 2ND Audio RecordNormal and Hi-Fi tracks. The main audio is not recorded Hi-Fi and normal tracksConnection Edit To Or From Another32 EN Power 34 EN Timer RecordingWhat happens if the tape reaches its end during recording? Can the VCR indefinitely remain in still mode?List of terms 36 ENFront display panel Front panelOn-screen display 38 ENRear panel You can operate JVCs TV How to use the RemoteVCR/TV 40 EN SpecificationsHOW to Locate Your JVC Service Center Consumer Video 42 ENMemo HR-A56U

HR-A56U specifications

The JVC HR-A56U is a VCR that emerged as a noteworthy entry in the realm of home entertainment systems, particularly during the late 1990s. It is known for its robust performance and a spectrum of features that cater to both casual viewers and avid tape collectors alike.

One of the prominent features of the HR-A56U is its remarkable video quality, enhanced by JVC's proprietary Super VHS (S-VHS) technology. This feature allows for higher resolution and improved color fidelity when using S-VHS tapes, making it an excellent choice for those who prioritize picture quality. The VCR also supports standard VHS tapes, ensuring broad compatibility with existing collections.

The SR-DST (Super Dynamic Noise Reduction) is another standout technology in the HR-A56U. This feature effectively reduces noise in the analog signal, delivering clearer audio and video playback, which is especially beneficial for tapes that have undergone multiple recordings or those stored for extended periods. The result is a pristine viewing experience, minimizing artifacts that could detract from the tape's original quality.

In addition to video playback, the HR-A56U offers versatile recording capabilities. It supports a range of recording speeds, including SP (Standard Play) and LP (Long Play), allowing users to choose between quality and tape duration based on their needs. The built-in timer recording function further enhances user convenience, enabling programming for up to eight different recordings at set times, ensuring that users never miss their favorite shows.

The device also incorporates an on-screen display (OSD) that provides clear information about the current status, time remaining, and other operational details. This function simplifies navigation and settings adjustments, making it user-friendly even for those unfamiliar with VCR technology.

For connectivity, the HR-A56U includes various inputs and outputs, including standard composite video and audio connections. This allows easy integration with other audio-visual components such as televisions and sound systems, ensuring a seamless viewing experience.

Overall, the JVC HR-A56U remains a noteworthy option for anyone seeking a reliable and feature-rich VCR with the capacity to deliver exceptional performance. Its combination of advanced technologies, ease of use, and superior picture quality makes it a timeless choice for both collectors of vintage recordings and new users looking to explore the world of VHS.