JVC HR-A56U manual 30 EN, Auto SP = EP Timer, Video Stabilizer, Blue Back, For Example

Page 30

30 EN

 

OTHER USEFUL FUNCTIONS (cont.)

 

 

* The default setting is bold in the table below.

 

 

 

 

 

AUTO SP = EP TIMER

When this function is set to “ON”, the VCR automatically switches to EP

ON

mode to allow complete recording if there is not enough tape to record

OFF

the entire program while timer-recording in SP mode.

 

For Example . . .

 

 

 

Recording a program of 140 minutes in length onto a 120-minute tape

 

 

Approximately 110 minutes

Approximately 30 minutes

 

 

 

 

 

 

 

SP mode

EP mode

 

 

Make sure you set this function to “ON” before the timer-recording starts.

 

NOTES:

 

 

 

If you have programed the VCR to timer-record 2 or more programs, the second

 

program and those thereafter may not fit on the tape with this function set to

 

"ON". In this case, do not use this function, but change the tape speed manually

 

during timer programing.

 

 

 

In order to ensure that the recording fits on the tape, this function may leave a

 

slight non-recorded portion at the end of the tape.

 

There may be some noise and sound disturbance where the tape speed switches

 

from SP to EP mode on the tape.

 

 

 

This function is not available during ITR (Instant Timer Recording), and will not

 

work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-

 

120.

 

 

 

 

 

 

 

VIDEO STABILIZER

When this function is set to “ON”, you can automatically correct vertical

ON

vibrations in the picture when playing back unstable recordings made on

OFF

another VCR.

 

 

 

NOTES:

 

 

 

When you finish viewing a tape, be sure to set this function to “OFF”.

 

Regardless of the setting, this function has no effect during recording and during

 

special effects playback.

 

 

 

The on-screen display may jitter vertically when this function is set to “ON”.

 

To watch recordings with close-caption, set this function to “OFF”.

 

 

BLUE BACK

When this function is set to “ON”, the TV screen becomes all blue in the

ON

following cases:

 

 

OFF

When receiving a channel not in use.

 

When stopping playback.

 

 

 

NOTE:

 

 

 

When you want to receive an unstable channel with poor signals, set this function

 

to “OFF”.

 

 

 

 

 

 

 

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HR-A56U Dear Customer Telephone NumberPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cable Flat feeder Matching transformerConnect VCR to TV Check contentsSituate VCR Final preparation for usePlug & Play Setting Perform Plug & Play setupWhat to do if Plug & Play setting failed Access Initial Set screen Language SettingAccess Main Menu screen Select languagePreparations Clock Setting10 EN Select clock setSelect host channel Setting clock semiautomaticallySet Auto Clock to on Select time zone12 EN Setting clock manuallySelect D.S.T. mode Manual Clock SetTuner Setting Access Tuner Set screenPerform Auto Channel Set 14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsBasic Playback Load a cassetteStart playback Changing display information Basic Playback Features16 EN Checking tape positionAdjusting tracking condition Selecting monitor soundAutomatic operations after 18 EN Locating beginning of timerAccess distant code Locating beginningSet tape speed Basic RecordingSelect recording channel Start recordingSpecifying recording length Basic Recording Features20 EN Watching one program while recording anotherErase on-screen display Showing on-screen displayDisplay VCR status on TV screen Other useful functions for recordingLocating particular scene Special Effect Playback22 EN Rapidly Picture Search High-Speed Picture SearchViewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playbackExpress Timer Programing 24 ENTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 26 ENConfirm overlapping programs Select program to modifyOverlapping programs blink on the screen 28 EN Useful Function SettingsChange setting Select FunctionPicture Control Auto TimerAuto Picture SuperimposeVideo Stabilizer Auto SP = EP Timer30 EN Blue BackNormal and Hi-Fi tracks. The main audio is not recorded 2ND Audio RecordAudio Monitor Hi-Fi and normal tracksEdit To Or From Another 32 ENConnection Power Timer Recording 34 ENCan the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?36 EN List of termsFront panel Front display panel38 EN Rear panelOn-screen display How to use the Remote VCR/TVYou can operate JVCs TV Specifications 40 ENHOW to Locate Your JVC Service Center 42 EN Consumer VideoMemo HR-A56U

HR-A56U specifications

The JVC HR-A56U is a VCR that emerged as a noteworthy entry in the realm of home entertainment systems, particularly during the late 1990s. It is known for its robust performance and a spectrum of features that cater to both casual viewers and avid tape collectors alike.

One of the prominent features of the HR-A56U is its remarkable video quality, enhanced by JVC's proprietary Super VHS (S-VHS) technology. This feature allows for higher resolution and improved color fidelity when using S-VHS tapes, making it an excellent choice for those who prioritize picture quality. The VCR also supports standard VHS tapes, ensuring broad compatibility with existing collections.

The SR-DST (Super Dynamic Noise Reduction) is another standout technology in the HR-A56U. This feature effectively reduces noise in the analog signal, delivering clearer audio and video playback, which is especially beneficial for tapes that have undergone multiple recordings or those stored for extended periods. The result is a pristine viewing experience, minimizing artifacts that could detract from the tape's original quality.

In addition to video playback, the HR-A56U offers versatile recording capabilities. It supports a range of recording speeds, including SP (Standard Play) and LP (Long Play), allowing users to choose between quality and tape duration based on their needs. The built-in timer recording function further enhances user convenience, enabling programming for up to eight different recordings at set times, ensuring that users never miss their favorite shows.

The device also incorporates an on-screen display (OSD) that provides clear information about the current status, time remaining, and other operational details. This function simplifies navigation and settings adjustments, making it user-friendly even for those unfamiliar with VCR technology.

For connectivity, the HR-A56U includes various inputs and outputs, including standard composite video and audio connections. This allows easy integration with other audio-visual components such as televisions and sound systems, ensuring a seamless viewing experience.

Overall, the JVC HR-A56U remains a noteworthy option for anyone seeking a reliable and feature-rich VCR with the capacity to deliver exceptional performance. Its combination of advanced technologies, ease of use, and superior picture quality makes it a timeless choice for both collectors of vintage recordings and new users looking to explore the world of VHS.
Top Page Image Contents