26 EN, Checking program settings | JVC HR-A56U instruction

JVC HR-A56U manual 26 EN, Checking program settings

Page 26

26 EN

TIMER RECORDING (cont.)

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

		A –1
1	2	3
		2
4	5	6
7	8	9
B –2	0	A –1B –4
C –3		B –2C –3
		B –2C –3
1
A –2, 3		B –2C –3
B –3		B –2C –3
B –3

C –3

C –2

Other Useful functions for timer recording

You can also use the following functions for timer recording.

Auto Timer ( pg. 29)

When “AUTO TIMER” is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

Auto SP = EP Timer ( pg. 30)

If there is not enough tape to record the entire broadcast for recording in SP mode, the VCR automatically switches to EP mode to allow complete recording. This feature is especially handy when recording a broadcast of more than 2 hours in length.

A Checking program settings

1 Disengage timer

Press TIMER, then press POWER.

When “AUTO TIMER” (	pg. 29) is set to “ON”,
you do not have to press TIMER.
2 Access Program Check screen
Press PROG. CHECK.	PR START		STOP	CH	DATE
	1	8:00P	10:00	12	12/24
	2	10:00A	10:45	40	12/25
	3	11:30P	1:00	125	12/25
	4
	5

PRESS (CHECK) TO NEXT

3 Access Program screen

Press PROG. CHECK again to check more detailed information. Each time you press PROG. CHECK, the next program’s Program screen appears. When all Program screens are shown, normal screen resumes.

B Cancelingsettings or changing program

1 Access Program screen Repeat steps 1 to 3 above.

2 Cancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–, STOP+/–, DATE+/–, CH+/–, and/or SP/ EP when the Program screen on which you want to make changes is shown.

3 Return to normal screen

Press PROG. CHECK as many times as necessary until no Program screen is shown.

4 Reengage timer recording standby mode

Press TIMER.

When “AUTO TIMER” ( pg. 29) is set to “ON”, the timer recording standby mode automatically resumes when you turn off the VCR.

Image 26

Contents

HR-A56U Dear Customer Telephone NumberPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cable Flat feeder Matching transformerConnect VCR to TV Check contentsSituate VCR Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Access Initial Set screen Language SettingAccess Main Menu screen Select languagePreparations Clock Setting10 EN Select clock setSelect host channel Setting clock semiautomaticallySet Auto Clock to on Select time zone12 EN Setting clock manuallySelect D.S.T. mode Manual Clock SetPerform Auto Channel Set Tuner SettingAccess Tuner Set screen 14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsStart playback Basic PlaybackLoad a cassette Changing display information Basic Playback Features16 EN Checking tape positionAutomatic operations after Adjusting tracking conditionSelecting monitor sound 18 EN Locating beginning of timerAccess distant code Locating beginningSet tape speed Basic RecordingSelect recording channel Start recordingSpecifying recording length Basic Recording Features20 EN Watching one program while recording anotherErase on-screen display Showing on-screen displayDisplay VCR status on TV screen Other useful functions for recording Locating particular scene Special Effect Playback 22 EN Rapidly Picture Search High-Speed Picture SearchViewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playbackExpress Timer Programing 24 ENTo use the VCR while it is in timer recording standby mode Engage timer recording standby modeTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 26 ENOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify 28 EN Useful Function SettingsChange setting Select FunctionPicture Control Auto TimerAuto Picture SuperimposeVideo Stabilizer Auto SP = EP Timer30 EN Blue BackNormal and Hi-Fi tracks. The main audio is not recorded 2ND Audio RecordAudio Monitor Hi-Fi and normal tracksConnection Edit To Or From Another32 EN Power Timer Recording 34 ENCan the VCR indefinitely remain in still mode? What happens if the tape reaches its end during recording?36 EN List of termsFront panel Front display panelOn-screen display 38 ENRear panel You can operate JVCs TV How to use the RemoteVCR/TV Specifications 40 ENHOW to Locate Your JVC Service Center 42 EN Consumer VideoMemo HR-A56U

JVC HR-A56U manual 26 EN, Checking program settings