JVC SR-W5U manual Controls and Connectors, Front Panel

* This function is not effective while playing back a tape recorded in the HD mode.

5 Tape loading slot door

6 Video unit display window

Displays the operational state of the recorder, counter and so on.

7 Infrared beam receiving window

8 [TRACKING –/+] button

Suppresses the disturbances appearing on the picture when a tape recorded on another machine is played back (or put on slow motion playback).

[AUTO] button

Turns on and off the auto tracking facility.

2 CONTROLS AND CONNECTORS

Front Panel

1 2 3 4 5 6 7 8

PHONES	VOLUME		REC LEVEL	IR REMOTE
			MANUAL	OFF
			AUTO	ON
	MIN	MAX		EDIT(HD REC)
	REMOTE
			NR(W-VHS PLAY)
		PAUSE		TRACKING	AUTO
			INPUT	ON
			LINE4	OFF
VIDEO		L– AUDIO –R		Y/C TIMING
				R
				C
				L

1[S-VIDEO/VIDEO/AUDIO INPUT 4] connectors Connect to the S-VIDEO/VIDEO/AUDIO OUTPUT connectors on the playback deck or camcorder with the S-VIDEO/VIDEO/AUDIO cable when this machine is used as a recording unit for editing.

If the sound is monaural, plug it to the AUDIO L connector. Identical audio sound will be recorded for left and right channels.

[REMOTE PAUSE] connector

When editing with a JVC camcorder, connect the mini-plug cord to this connector.

2[PHONES] connector

Accepts the mini plug type headphone.

[VOLUME] adjust knob

Adjust the sound level of headphone connected to the PHONES connector.

3[REC LEVEL] switch

MANUAL: Set to this position when adjusting the Hi-Fi recording level and the volume balance between left and right audio channels manually. AUTO : Normally set to this position.

4[IR REMOTE] switch

OFF: Set to this position when not operating with a wireless remote control unit.

ON : Normally set to this position.

[EDIT(HD REC)/NR(W-VHS PLAY)] switch When using W-VHS tapes, adjust the picture to the desired tone.

ON : • Set to this position when noise is noticeable during playback of HD/SD recorded tapes.

•Set to this position when recording from Hi- Vision video cameras and from professional equipment.

OFF : • Normally set to this position during play- back.

•Set to this position when recording from another W-VHS VCR.

[Y/C TIMING] switch

Adjusts the horizontal color phase.

R: Set to this position when the color phase shifts toward the left.

C : Normally set to this position.

L: Set to this position when the color phase shifts toward the right.

8