Filename |
|
Masterpage:Left |
10 EN | INDEX (cont.) |
ON-SCREEN DISPLAY (for VHS deck)
If you press DISPLAY/OSD on the Remote when “SUPERIMPOSE” is set to “ON” ( pg. 71), various operational indicators appear on the TV screen.
A Operation Mode Indicators
B Tape Speed SP/EP
C Timer Warning Display
A warning appears on the TV screen to tell you that the timer- recording is to start in 5 minutes if you’re not in the Timer mode at that time. The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press CANCEL on the Remote.
D Tape Position Indicator
The tape position indicator appears on the TV screen when you press REW (3) or FF (5) from the Stop mode or perform an Index Search ( pg. 30). The position of “q” in relation to “B” (beginning) or “E” (end)
shows you where you are | Beginning | End | |
on the tape. | |||
|
|
NOTE:
Depending on the type of tape being used, the tape position indicator may not appear correctly.
E Index number pg. 30
F Tape Remaining Time Indicator G Counter Display pg. 33
H Audio Mode Display pg. 31 I VHS Indicator
J SAP Indicator pg. 34
K Stereo program Indicator pg. 34 L Day/Clock Display
M Channel Position Number/ Auxiliary Input Indicator
(DV ] VHS) pg. 52 N “Cassette Loaded” Mark
To recall an indication
APress DISPLAY/OSD.
●All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, remain on the screen.
BPress DISPLAY/OSD again to clear the display.
●The RECORD/PAUSE indication remains on the screen.
Page 10
January 31, 2002 3:21 pm