JVC SR-VS30U manual Access the Tuner Set screen, Perform Auto Channel Set

Filename [VS30U_1a-EN.fm]

VS30U_1a-EN.fm Page 18 Thursday, January 31, 2002 3:35 PMMasterpage:Left

18 EN	INITIAL SETTINGS (cont.)
Tuner Set	Auto Channel Set
	Perform Auto Channel Set only if channels have not been set
	correctly by the Plug&Play setting.

Turn on the TV and select the AV mode.

1	T	W
	2	3

2

4 5 6

7 8 9

04

1 DV S-VHS

A Turn on the VCR.

Press POWER.

B Access the Main Menu screen.

Press MENU.

C Access the Tuner Set screen.

Press rt to move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

D Perform Auto Channel Set.

Press rt to move the highlight bar (arrow) to “AUTO CH SET”, then press OK or e. You can automatically set the receivable channels in your area in the order of their frequencies.

●When Auto Channel Set is complete, “SCAN COMPLETED” appears on the

TV screen.

●If the scan was unsuccessful,

“SCAN COMPLETED–NO

SIGNAL–” appears on screen. Check the connections and start again.

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set. The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.

E Return to the normal screen.

Press MENU.

Page 18

January 31, 2002 3:35 pm