JVC HR-DD848E specifications Start Playback

Page 23

RECORD

SLOW

SLOW

q

 

PAUSE

PLAY

 

2

 

1

2

3

4

5

6

7

8

9

 

0

4

 

PLAY

 

PAUSE

RECORD

3

1

EN23

NOTES:

●The B.E.S.T. system works for both SP and LP modes only after a tape has been inserted and the Record mode is first initiated. It does not work during recording.

●In the case of timer recording, the B.E.S.T. system works before recording is initiated.

●Once the cassette is ejected, the B.E.S.T. data is cancelled. The next time the cassette is used for recording, B.E.S.T. is re- performed.

ATTENTION:

Since the B.E.S.T. system works before recording actually starts, there is a delay of approximately 7 seconds after RECORD and PLAY on the remote are pressed, or RECORD on the recorder is pressed. To make sure you record the desired scene or programme in its entirety, first perform the following steps:

1)Press and hold PAUSE and RECORD to engage the RECORD PAUSE mode.

●The recorder then automatically checks the condition of the tape and, after approximately 7 seconds, re- enters RECORD PAUSE.

2)Press PLAY to start recording.

●If you want to bypass the B.E.S.T. system and begin recording immediately, set “B.E.S.T.” to “OFF” in step 4 on page 22.

Playback

The recorder assesses the quality of the tape once you initiate playback.

When watching a tape recorded with “B.E.S.T.” set to “ON”, it is recommended that you leave B.E.S.T. on during playback as well.

START PLAYBACK

1 Press PLAY.

●The recorder adjusts the playback picture quality based on the quality of the tape in use.

●B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel.

NOTES:

●When watching a rental tape or one recorded on another video recorder, or when using this recorder as the player for editing, set B.E.S.T. to your preference by performing steps 2 through 5 on page 22.

●"BEST" only appears at the beginning of automatic tracking. Even though it doesn't appear after that, the B.E.S.T. function is operative.

Page 22 Page 24
Image 23
Page 22 Page 24
Contents HR-DD848E/EH Do not place the recorder Safety PrecautionsFor Italy Back of TV Installing Your NEW Record ER ENBasic Connections Channel is set to the Video channel pgNitial Sett Ings Auto Set UpTurn on the Recorder Select CountryLanguage Code for the HR-DD848E Perform Auto SET UPSelect Language If you are referring to the on-screen displayJust Clock Initial SettingsIf both auto channel set and auto clock set have failed Language for the on-screen displayLanguage Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode EN Initial SettingsWith AV Connection Guide Program Number Set SetupMake List of Stored Station Names Channel Positions Confirm Channel Position Number When Using a Satellite TunerEnter Showview NumberPlayback BasicActivate FRAME-BY-FRAME Playback Playback FeaturesActivate HIGH-SPEED Search Pause During PlaybackReturn to Automatic Adjust TrackingOverride Automatic Tracking ManuallyInstant ReView Activate Instant ReviewNtsc Playback During Playback Activate SpatializerSpatializer Soundtrack SelectionStop Scene Finder SET A/B Code SwitchRE-SUPPLY Power Activate Scene FinderVariable-Speed Search/ Reverse Play Audio signal during TimeScanTimeScan Speed SP Speed LP Audio output TimeScanReturn to Normal Screen Access Main Menu ScreenAccess Mode SET Screen Select ModeBasic Recording Return to Normal Access Main MenuS.T. Picture System ScreenPlayback 13 3 ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Press Push JOG %ÞtoSET Counter Display Reset CounterSelect Channel to WatchType of Broadcast On-screen Display Being Received Receiving Stereo And Bilin- gual ProgrammesTo Record Stereo And Bilin- gual Programmes A2 Press Record on the recorder Engage ITR ModeInstant Timer Recording ITR SET Recording DurationEN Timer Recording Timer RecordingPress MENU, then try again from step Press TIMER. The recorder turns off automaticallySatellite Tuner Users EN Timer RECORDINGcont Regular Timer ProgrammingPress SP/LP to set the tape speed Press TV Prog +Revise Programme Access ProgrammeAuto Timer Check And Cancel ProgrammesEngage Auto SP/LP TimerAuto SP/LP Timer Timer WarningStart Source Player SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Make ConnectionsRecorder Player PlayerYour recorder RecorderStart Recorder Edit From a CamcorderSET RECORDER’S Input Start CamcorderStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderSpeaker Television Connecting Using a Stereo SystemAUX in or Tape Monitor TRY Operating TV TV Multi Brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeTRY Operating Satellite Tuner Satellite Tuner MultiSET Satellite Tuner Brand Code Auto Channel Set Access Country SETTuner SET End Pointer to Language of yourTo initiate Auto Channel Set Appears, Remains on screenClose Confirmation Select ItemDelete Channel Select NEW PositionSelect NEW Station Switch StationsAccess Manual CH. SET Perform TuningTV Station And ID List Screen appears Clock SETPreparation Move the highlight bar pointer to Clock SET byStart Clock Operation SET Clock AutomaticallySET Date and Time SET Just ClockTroubleshooting E N Camcorder recording is not Camcorder has not been Timer againOubleshooting Questions and Answer S E N Ä remain lit on the display panel. Is there a problem?Index Remove the cap to use the front panel connectorsRear View EN Index Installing BatteriesHow To Use Maximum recording time SpecificationsLanguage Code for the HR-DD848EH Auto Set Up completedInternational Telephone Country Code Language Code for the HR-DD848E

HR-DD848E specifications

The JVC HR-DD848E is a notable video cassette recorder (VCR) that emerged as a significant device in the late 1990s. It is particularly known for its advanced features and technological advancements that set it apart from conventional VCRs of its time. As part of JVC's esteemed line of video equipment, the HR-DD848E stands out for its ability to deliver high-quality playback and recording, marking it a favorite among enthusiasts and casual users alike.

One of the main features of the HR-DD848E is its Dual Play capability, allowing users to play back different formats without the need for additional equipment. The device supports both standard VHS tapes as well as the more advanced S-VHS format. S-VHS, known for its superior resolution and video quality compared to standard VHS, is complemented by the VCR’s built-in digital noise reduction and picture enhancement technology. This ensures that the playback experience is crisp and clear, regardless of tape quality.

Another distinguishing characteristic of the JVC HR-DD848E is its user-friendly interface. The device features straightforward controls and an intuitive on-screen menu, making it easy for individuals of all ages to operate. The included remote control also contributes to the user's convenience, providing access to various functionalities such as fast-forward, rewind, and pause.

The HR-DD848E is equipped with several advanced recording features. The Time Base Corrector (TBC) and the LP (Long Play) mode enhance the recording quality, allowing for longer playtime with satisfactory image clarity. The device also supports programming capabilities, enabling users to set timers for recordings, ensuring that they never miss their favorite shows, even during busy times.

Moreover, it features an AV input/output, enabling connectivity with other devices, such as cameras or additional video sources, making it versatile for various multimedia applications.

In summary, the JVC HR-DD848E is a remarkable VCR that encapsulates the technological innovations of its era. With features that enhance playback and recording quality, user-friendly operation, and the ability to connect with other devices, it represents a significant leap forward in home video technology. Whether for casual viewing or archiving cherished memories, the HR-DD848E remains a memorable part of video recording history.
Top Page Image Contents