JVC HR-DD848E Initial Settings, If both auto channel set and auto clock set have failed

Page 6

6EN

INITIALSETTINGS(cont.)

If both auto channel set and auto clock set have been performed successfully:

1 Perform "Video Channel Set" on page 8.

2 Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).

●If station names (ID — ☞ pg. 46) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 44 – 45.

3 Perform "SHOWVIEW Setup" on page 10 to check if the Guide Program numbers have been set correctly.

If auto channel set has succeeded but auto clock set has not:

1 Perform "Video Channel Set" on page 8.

2 Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).

●If station names (ID — ☞ pg. 46) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds when the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 44 – 45.

3 Perform "Clock Set" on page 47, then "SHOWVIEW Setup" on page 10 to check if the Guide Program numbers have been set correctly.

If both auto channel set and auto clock set have failed:

1 Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the recorder power back on again.

●The Country Set display appears on the front display panel and/or on the screen; perform steps 2 and 4 on pages 4 – 5 again.

IMPORTANT

●Depending on the reception conditions, the station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly, SHOWVIEW timer recording (☞ pg. 28) will not work correctly; be sure to check if the Guide Program numbers have been set correctly (☞ pg.10, "SHOWVIEW Setup").

●Since your video recorder memorizes all detected stations even if the reception condition is poor, some of those stored stations may produce a noisy picture. To delete those stations, ☞ "Delete A Channel" on page 44.

INFORMATION

Language for the on-screen display

Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 4 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI

[ SUOMI

SVERIGE

[ SVENSKA

ESPAÑA

[ CASTELLANO

PORTUGAL

[ ENGLISH

DANMARK

[ DANSK

NEDERLAND

[ NEDERLANDS

DEUTSCHLAND

[ DEUTSCH

ÖSTERREICH

[ DEUTSCH

GREECE

[ ENGLISH

NORGE

[ NORSK

ITALIA

[ ITALIANO

OTHERS

[ ENGLISH

If you want to change the language setting manually, ☞ "Language" on page 7.

Just Clock

Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to "ON".

☞"Just Clock" on page 47.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents HR-DD848E/EH Safety Precautions For ItalyDo not place the recorder Channel is set to the Video channel pg Installing Your NEW Record ER ENBasic Connections Back of TVSelect Country Auto Set UpTurn on the Recorder Nitial Sett IngsIf you are referring to the on-screen display Perform Auto SET UPSelect Language Language Code for the HR-DD848ELanguage for the on-screen display Initial SettingsIf both auto channel set and auto clock set have failed Just ClockLanguage EN Initial Settings Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith AV Connection Setup Make List of Stored Station Names Channel PositionsGuide Program Number Set Number When Using a Satellite TunerEnter Showview Confirm Channel Position NumberBasic PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Activate FRAME-BY-FRAME PlaybackManually Adjust TrackingOverride Automatic Tracking Return to AutomaticActivate Instant Review Ntsc PlaybackInstant ReView Soundtrack Selection Activate SpatializerSpatializer During PlaybackActivate Scene Finder SET A/B Code SwitchRE-SUPPLY Power Stop Scene FinderAudio signal during TimeScan TimeScanVariable-Speed Search/ Reverse Play TimeScan Speed SP Speed LP Audio outputSelect Mode Access Main Menu ScreenAccess Mode SET Screen Return to Normal ScreenBasic Recording Screen Access Main MenuS.T. Picture System Return to NormalPlayback Press Push JOG %Þto ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays 13 3Watch Reset CounterSelect Channel to SET Counter DisplayReceiving Stereo And Bilin- gual Programmes To Record Stereo And Bilin- gual Programmes A2Type of Broadcast On-screen Display Being Received SET Recording Duration Engage ITR ModeInstant Timer Recording ITR Press Record on the recorderTimer Recording EN Timer RecordingPress TIMER. The recorder turns off automatically Satellite Tuner UsersPress MENU, then try again from step Regular Timer Programming EN Timer RECORDINGcontPress TV Prog + Press SP/LP to set the tape speedCheck And Cancel Programmes Access ProgrammeAuto Timer Revise ProgrammeTimer Warning TimerAuto SP/LP Timer Engage Auto SP/LPMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerRecorder PlayerYour recorder Recorder PlayerStart Camcorder Edit From a CamcorderSET RECORDER’S Input Start RecorderEngage Audio Dubbing SET Input ModeLocate Start Point Start DubbingConnect Decoder Connecting Using a DecoderSelect Input Mode SET TunerConnecting Using a Stereo System AUX in or Tape MonitorSpeaker Television SET TV Brand Code TV Multi Brand Remote ControlControl Your TV Using Additional Buttons TRY Operating TVSatellite Tuner Multi SET Satellite Tuner Brand CodeTRY Operating Satellite Tuner Access Country SET Tuner SETAuto Channel Set Appears, Remains on screen Pointer to Language of yourTo initiate Auto Channel Set EndSelect NEW Position Select ItemDelete Channel Close ConfirmationPerform Tuning Switch StationsAccess Manual CH. SET Select NEW StationTV Station And ID List Move the highlight bar pointer to Clock SET by Clock SETPreparation Screen appearsSET Just Clock SET Clock AutomaticallySET Date and Time Start Clock OperationTroubleshooting E N Timer again OubleshootingCamcorder recording is not Camcorder has not been Ä remain lit on the display panel. Is there a problem? Questions and Answer S E NRemove the cap to use the front panel connectors IndexRear View Installing Batteries How To UseEN Index Specifications Maximum recording timeLanguage Code for the HR-DD848E Auto Set Up completedInternational Telephone Country Code Language Code for the HR-DD848EH

HR-DD848E specifications

The JVC HR-DD848E is a notable video cassette recorder (VCR) that emerged as a significant device in the late 1990s. It is particularly known for its advanced features and technological advancements that set it apart from conventional VCRs of its time. As part of JVC's esteemed line of video equipment, the HR-DD848E stands out for its ability to deliver high-quality playback and recording, marking it a favorite among enthusiasts and casual users alike.

One of the main features of the HR-DD848E is its Dual Play capability, allowing users to play back different formats without the need for additional equipment. The device supports both standard VHS tapes as well as the more advanced S-VHS format. S-VHS, known for its superior resolution and video quality compared to standard VHS, is complemented by the VCR’s built-in digital noise reduction and picture enhancement technology. This ensures that the playback experience is crisp and clear, regardless of tape quality.

Another distinguishing characteristic of the JVC HR-DD848E is its user-friendly interface. The device features straightforward controls and an intuitive on-screen menu, making it easy for individuals of all ages to operate. The included remote control also contributes to the user's convenience, providing access to various functionalities such as fast-forward, rewind, and pause.

The HR-DD848E is equipped with several advanced recording features. The Time Base Corrector (TBC) and the LP (Long Play) mode enhance the recording quality, allowing for longer playtime with satisfactory image clarity. The device also supports programming capabilities, enabling users to set timers for recordings, ensuring that they never miss their favorite shows, even during busy times.

Moreover, it features an AV input/output, enabling connectivity with other devices, such as cameras or additional video sources, making it versatile for various multimedia applications.

In summary, the JVC HR-DD848E is a remarkable VCR that encapsulates the technological innovations of its era. With features that enhance playback and recording quality, user-friendly operation, and the ability to connect with other devices, it represents a significant leap forward in home video technology. Whether for casual viewing or archiving cherished memories, the HR-DD848E remains a memorable part of video recording history.
Top Page Image Contents