JVC HR-DD848E specifications Video Channel Set, Access Video Channel SET Mode, SET Video Channel

Page 8

8ENINITIALSETTINGS(cont.)

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below.

If you have connected the video recorder to your TV via both the provided RF cable and a 21-pin SCART cable (AV connection) – Go to "With AV Connection" on next page.

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

With RF Connection

 

SLOW SLOW

q

1

 

PROG+/–

 

STOP

TV

 

2

 

 

 

2

 

1

2

3

4

5

6

7

8

9

 

0

4

 

 

TV PROG

3

OK

1

TEST SIGNAL

The channel on which the screen to

3

the left appear clearly in step 2 is

your Video Channel.

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

Set your TV to UHF channel 36.

●If the two vertical white bars appear clearly on the screen as shown in the illustration at bottom left, go to step 3.

●If the two vertical white bars do not appear clearly, press TV PROG + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 3. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

EXIT VIDEO CHANNEL SET MODE

Press OK.

To view picture signals from the video recorder, set your TV to the Video Channel.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents HR-DD848E/EH Do not place the recorder Safety PrecautionsFor Italy Installing Your NEW Record ER EN Basic ConnectionsChannel is set to the Video channel pg Back of TVAuto Set Up Turn on the RecorderSelect Country Nitial Sett IngsPerform Auto SET UP Select LanguageIf you are referring to the on-screen display Language Code for the HR-DD848EInitial Settings If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage Access Video Channel SET Mode Exit Video Channel SET ModeEN Initial Settings Video Channel SetWith AV Connection Guide Program Number Set SetupMake List of Stored Station Names Channel Positions When Using a Satellite Tuner Enter ShowviewNumber Confirm Channel Position NumberBasic PlaybackPlayback Features Activate HIGH-SPEED SearchPause During Playback Activate FRAME-BY-FRAME PlaybackAdjust Tracking Override Automatic TrackingManually Return to AutomaticInstant ReView Activate Instant ReviewNtsc Playback Activate Spatializer SpatializerSoundtrack Selection During PlaybackSET A/B Code Switch RE-SUPPLY PowerActivate Scene Finder Stop Scene FinderVariable-Speed Search/ Reverse Play Audio signal during TimeScanTimeScan TimeScan Speed SP Speed LP Audio outputAccess Main Menu Screen Access Mode SET ScreenSelect Mode Return to Normal ScreenBasic Recording Access Main Menu S.T. Picture SystemScreen Return to NormalPlayback ENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysPress Push JOG %Þto 13 3Reset Counter Select Channel toWatch SET Counter DisplayType of Broadcast On-screen Display Being Received Receiving Stereo And Bilin- gual ProgrammesTo Record Stereo And Bilin- gual Programmes A2 Engage ITR Mode Instant Timer Recording ITRSET Recording Duration Press Record on the recorderTimer Recording EN Timer RecordingPress MENU, then try again from step Press TIMER. The recorder turns off automaticallySatellite Tuner Users Regular Timer Programming EN Timer RECORDINGcontPress TV Prog + Press SP/LP to set the tape speedAccess Programme Auto TimerCheck And Cancel Programmes Revise ProgrammeTimer Auto SP/LP TimerTimer Warning Engage Auto SP/LPSET Recording DECK’S Input Mode Edit To Or From Another Video RecorderMake Connections Start Source PlayerPlayer Your recorderRecorder Recorder PlayerEdit From a Camcorder SET RECORDER’S InputStart Camcorder Start RecorderSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerSpeaker Television Connecting Using a Stereo SystemAUX in or Tape Monitor TV Multi Brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code TRY Operating TVTRY Operating Satellite Tuner Satellite Tuner MultiSET Satellite Tuner Brand Code Auto Channel Set Access Country SETTuner SET Pointer to Language of your To initiate Auto Channel SetAppears, Remains on screen EndSelect Item Delete ChannelSelect NEW Position Close ConfirmationSwitch Stations Access Manual CH. SETPerform Tuning Select NEW StationTV Station And ID List Clock SET PreparationMove the highlight bar pointer to Clock SET by Screen appearsSET Clock Automatically SET Date and TimeSET Just Clock Start Clock OperationTroubleshooting E N Camcorder recording is not Camcorder has not been Timer againOubleshooting Ä remain lit on the display panel. Is there a problem? Questions and Answer S E NRemove the cap to use the front panel connectors IndexRear View EN Index Installing BatteriesHow To Use Specifications Maximum recording timeAuto Set Up completed International Telephone Country CodeLanguage Code for the HR-DD848E Language Code for the HR-DD848EH

HR-DD848E specifications

The JVC HR-DD848E is a notable video cassette recorder (VCR) that emerged as a significant device in the late 1990s. It is particularly known for its advanced features and technological advancements that set it apart from conventional VCRs of its time. As part of JVC's esteemed line of video equipment, the HR-DD848E stands out for its ability to deliver high-quality playback and recording, marking it a favorite among enthusiasts and casual users alike.

One of the main features of the HR-DD848E is its Dual Play capability, allowing users to play back different formats without the need for additional equipment. The device supports both standard VHS tapes as well as the more advanced S-VHS format. S-VHS, known for its superior resolution and video quality compared to standard VHS, is complemented by the VCR’s built-in digital noise reduction and picture enhancement technology. This ensures that the playback experience is crisp and clear, regardless of tape quality.

Another distinguishing characteristic of the JVC HR-DD848E is its user-friendly interface. The device features straightforward controls and an intuitive on-screen menu, making it easy for individuals of all ages to operate. The included remote control also contributes to the user's convenience, providing access to various functionalities such as fast-forward, rewind, and pause.

The HR-DD848E is equipped with several advanced recording features. The Time Base Corrector (TBC) and the LP (Long Play) mode enhance the recording quality, allowing for longer playtime with satisfactory image clarity. The device also supports programming capabilities, enabling users to set timers for recordings, ensuring that they never miss their favorite shows, even during busy times.

Moreover, it features an AV input/output, enabling connectivity with other devices, such as cameras or additional video sources, making it versatile for various multimedia applications.

In summary, the JVC HR-DD848E is a remarkable VCR that encapsulates the technological innovations of its era. With features that enhance playback and recording quality, user-friendly operation, and the ability to connect with other devices, it represents a significant leap forward in home video technology. Whether for casual viewing or archiving cherished memories, the HR-DD848E remains a memorable part of video recording history.
Top Page Image Contents