JVC HR-J240E specifications Basic, Connections

INSTALLINGYOURNEWRECORDEREN

3

Basic		It's essential that your video recorder be properly connected.
		FORMED.
		Follow these steps carefully. THESE STEPS MUST BE COM-
Connections		PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-
			Make sure the package contains all of the accessories
			CHECK CONTENTS
		1 listed in “Specifications” (☞ pg. 31).
Aerial terminal		2	SITUATE RECORDER
Back of TV			Place the recorder on a stable, horizontal surface.
			CONNECT RECORDER TO
			TV
21-pin SCART			The connection method you use depends on the type
			of TV you have.
connector	TV Aerial
		3 RF CONNECTION
	Cable
RF Cable			● To Connect To A TV With NO AV Input Terminals . . .
			a– Disconnect the TV aerial cable from the TV.
(provided)			b– Connect the TV aerial cable to the ANT. IN jack
21-pin SCART Cable			on the rear panel of the recorder.
			c– Connect the provided RF cable between the RF
			OUT jack on the rear panel of the recorder and
			the TV’s aerial terminal.

	Before operating the recorder, make sure the
	TV’s channel is set to the VIDEO channel
Mains Power	(☞ pg. 5).
	AV CONNECTION
Cord
	● To Connect To A TV With AV Input Terminals . . .
	a– Connect the aerial, recorder and TV as per “RF
	CONNECTION”.
	b– Connect an optional SCART cable between the
	AV1 IN/OUT socket on the rear panel of the
	recorder and the TV’s 21-pin SCART connector.
	Before operating the recorder, make sure the TV
	is set to the VIDEO (or AV) mode.
Rear View	CONNECT RECORDER TO
AV1 IN/OUT	MAINS
Mains outlet	Plug the end of the mains power cord into a mains
	4 outlet.
	After you plug the mains power cord into a mains outlet, the
	Auto Set Up display appears on the TV screen and/or on the
	recorder's front display panel when the	button on the
	recorder/remote control is pressed for the first time to power
	on the recorder ☞ pg. 4.