JVC HM-HDS1U manual Press OSD, Tuned-in channel or AUXiliary mode, Operation mode

Superimpose

This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen.

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	● If you want to stop the following procedure on its
	way, press MENU.

	ACCESS FUNCTION
2	SCREEN
	1) At the top of Main	HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP
	Menu screen, move	FUNCTION	VIDEO INPUTS
	the arrow to “FUNC-	SUPERIMPOSE		OFF
		BLUE BACK		ON
	TION SET UP” by	2ND AUDIO RECORD		OFF
	pressing @# (or 23),
	then press Þ (or °)
	or OK.	INDEX	MENU
			SELECT WITH [°523]
	2) On the Function Set
		SELECT OK	END THEN PRESS	[OK]
	Up screen, move the
	arrow to “FUNCTION” by pressing @# (or 23),
	then press Þ (or °) or OK.

	SELECT SUPERIMPOSE
3	MODE
	1) On the Function	HDD/VHS SET UP FUNCTION SET UP			INITIAL SET UP
	screen, move the	FUNCTION		VIDEO INPUTS
	arrow to “SUPERIM-	SUPERIMPOSE			OFF
					OFF
	POSE” by pressing	BLUE BACK			ON
	%Þ (or 5°), then	2ND AUDIO RECORD			OFF
	press OK.
	2) Press %Þ (or 5°) to	INDEX	MENU	SELECT WITH [°523]
	select the desired
		SELECT OK	END	THEN PRESS [OK]
	mode, then press OK.

a– Select “ON” if you want the superimposed opera- tional indications on the screen about 5 seconds when operating the recorder.

b– Select “OFF” if you do not want the superimposed operational indications on the screen.

RETURN TO NORMAL

SCREEN

4 Press MENU.

EN41

To recall an indication

1Press OSD.

■All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, are left displayed on the screen.

2Press OSD again to clear the display.

■The RECORD/PAUSE indication is left displayed on the screen.

NOTES:

●If you engage the Record Pause mode, RECORD/PAUSE is displayed regardless of the Superimpose mode setting.

●If you select a channel on which no signal is received, the channel number is displayed regardless of the Superimpose mode setting.

The superimposed indication on the TV screen tells you what the recorder is doing.

1		7
2	CH 125	RECORD	8
3	THU 12:00 AM	PAUSE
	STEREO	] SP	9

4SAP VHS

5	B	+	+	+	E		10
				INDEX-1		11
6	NORM	COUNT		–1:23:45		12
	HI–FI

VHS

1– Tuned-in channel or AUX(iliary) mode

When the channel is changed, the new channel is displayed on the screen for 5 seconds.

2– Clock time

3– Stereo program indication

4– Second Audio Program indication 5– VHS indicator

6– Audio mode indications 7– “Cassette Loaded” mark

When a cassette is loaded, the mark is displayed for 5 seconds. It blinks when the recorder’s EJECT button is pushed.

8– Operation mode

When the operation mode is changed, the new mode is displayed — RECORD (5 sec.), PLAY (5 sec.), FF/REW (5 sec. when engaged from Stop mode), RECORD PAUSE (for as long as Pause is engaged), and ITR *:** (5 sec.).

9– Tape speed indication 10– Tape position indicator 11– INDEX indication 12– Counter reading

Switchable to the tape remaining time display