JVC HM-DR10000EK setup guide Maximum recording time, VHF 44.5 143/143 470 MHz

Page 80

SPECIFICATIONS

GENERAL

Power requirement	: AC 220 – 240 V`, 50/60 Hz
Power consumption
Power on	: 36 W
Power off	: 8.7 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)	: 468 x 145 x 369 mm
Weight	: 8.0 kg
Maximum recording time
D-VHS (STD)	: 420 min. with DF-420 video
	cassette
D-VHS (LS3)	: 1260 min. with DF-420 video
	cassette
S-VHS/VHS (SP)	: 240 min. with E-240 video
	cassette
S-VHS/VHS (LP)	: 480 min. with E-240 video
	cassette
VIDEO/AUDIO (D-VHS)
Format	: MPEG2 standard mode
Track composition
Tape speed	: 16.67 mm/sec (STD mode)
	5.56 mm/sec (LS3 mode)
Head azimuth	: ±30 deg
Drum rotation	: 1800 rpm
Tracking system	: CTL track system
Recording specification
Main data input rate	: 14.1 Mbps (STD mode)
	4.7 Mbps (LS3 mode)
Sub data input rate	: 0.146 Mbps (STD mode)
	48.7 Kbps (LS3 mode)
Recording rate	: 19.14 Mbps
Track structure	: 1 Sector
Length of sync block	: 112 bytes
Inner ECC	: RS code
Outer ECC	: RS code
Code word shuffling	: 6 tracks
Modulation system	: SI-NRZI

VIDEO/AUDIO
Format	: S-VHS/VHS PAL standard	HM-
Signal system	: PAL-type colour signal and
	CCIR monochrome signal,
	625 lines/50 fields
Recording system	audio)	DR10000EK
Recording system	: DA4 (Double Azimuth) helical
	scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 250 lines (VHS)
	400 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal
	audio)
	20 Hz to 20,000 Hz (Hi-Fi
CONNECTOR
CONNECTOR
Input/Output	: 21-pin SCART connectors
	(IN/OUT x 1,
	IN/DECODER x 1)
	RCA connectors
	(VIDEO IN x 1, AUDIO IN x 2,
	AUDIO OUT x 1)
	S-Video connectors
	(IN x 2, OUT x 1)
	DV connector : IN x 1
	(4-pin, IEEE1394 conformity,
	digital input)
TUNER/TIMER
TV channel storage
capacity	: 99 positions
	(+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 44.5 – 143/143 – 470 MHz
	UHF 470 – 862 MHz
Memory backup time	: Approx. 60 min.
ACCESSORIES
Provided accessories	: RF cable,
	S-Video cable,
	21-pin SCART cable,
	DV cable,
	Power cord,
	Infrared remote control unit,
	"AA" battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

VICTOR COMPANY OF JAPAN, LIMITED

COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.

	Printed in Japan
EK	1299MNVIDVP
	1299MNVIDVP

Image 80

Contents HM-DR10000EK Safety Precautions Connection to the mains supply in the United KingdomSymptoms of dirty video heads Early symptomLate symptom Block noise Still image Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder Connect Video Recorder to TVBack of TV Audio in connectors Mains power inletVideo OUTStep Auto SET UP Before performing the following procedure, make sure thatProgram number set Or remote control until the display panelShows clock time, PR 1 or Auto Set Up results appear on the display panel If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Recording Mode PAUSE/RESUMEVHS/VHS Recording VHSSelect Preset to Watch Engage ITR ModeInstant Timer Recording ITR SET Recording DurationReset Counter SET Counter DisplayDisplay Remaining Time Elapsed Recording Time IndicationAccess Video PLUS+ Screen Access Video PLUS+ ProgramVideo Plus+ Enter Pluscode NumberSET PDC Mode Engage RECORDER’S TimerPDC Recording Return to Normal ScreenExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start TimeSET PDC Mode Timer ModeReturn to Normal ScreenAccess Programme SCREEN/DISPLAY Check, Cancel And Replace ProgrammesDisengage Timer Mode Access Programme Check SCREEN/DISPLAYCancel or Replace a Return to Timer ModeProgramme Return to Normal SCREEN/DISPLAYNavigation To start recording on the blank portion of a tapeAccess Main Menu Screen Access Video Navigation ScreenCheck Memory Return to Normal ScreenAccess Main Menu Access VideoTitle Editing Edit Tape TitleEdit Programme Title And Category Enter CharacterEntering Character To delete, then press Delete Tape DataTape number you want Delete Programme DataDelete Programme Data YES, then press OK or #Access Sorting Screen Sorting By Tape NumberSelect Category Sorting By DateSorting By Category Recording According To Tape Type VHS Super VHS And VHSSelect S-VHS Mode Pointer to Mode SETBy pressing %Þ, then press Move the highlight pointer to S-VHS by pressingS.T. Picture System Access Mode SETSelect B.E.S.T. Mode Or press Record on the recorder RecordingPlayback Manual Tracking Digital TBC/NR S-VHS/VHS Mode OnlyDigital 3R S-VHS/VHS Mode Only Looking For Scene You Want Activate Index SearchSkip Over Unwanted SectionsVHS/VHS mode Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedSoundtrack Selection S-VHS/VHS Mode Soundtrack Selection D-VHS ModeAudio Rec Mode Setting D-VHS Mode Only During PlaybackAutomatic Satellite Programme Recording Satellite Receiver UnitANT. RF OUT Video OUTAccess Mode SET Screen Select AV2 Select ModeEngage Auto Satellite Prog REC Mode SET Tape SpeedRemote Control Functions SET Remote ControlRemote A/B Code Switching CodeTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Receiver Multi Brand Remote Control Brand CodeOperate Satellite Receiver TV Prog +/-,NUMBER keysAccess Mode SET Screen Select Picture Control SET ModeMinimizing Picture Degradation While Editing Picture ControlEdit From Camcorder DV Sound Setting If the camcorder has an S-VIDEO output connectorIf the camcorder has a DV OUT connector Recorder RecorderStart Source Player Input ModeEdit To Or From Another Video Recorder TV Receiver AV mode Your recorderAnother recorder Recorder PlayerAV1 Select Setting AV2 Select SettingSynchro Editing Repeat steps 5 7 as necessaryAccess Initial SET Screen Access Jlip ID NO. SET ScreenTerminal Jlip Joint Level Interface Protocol Connector Information On J TerminalOn-Screen Display ENABLE/DISABLEOther Functions Press %Þ to move the highlight bar pointer to Power Save ModePower SAVE, then press OK or #to set to on Next Function Memory Auto SP→LP TimerAuto Timer Activate Repeat Playback Repeat PlaybackNtsc Playback Connection To Stereo System Audio OUTTuner Set Perform Auto Channel SETAuto Channel Set Pointer to Auto CHScreen preset positions ProceduresAfter Scan Completed Is displayed on the screenStoring Channels Manually Input ChannelEnter NEW Channel Information Close Confirmation ScreenDelete a Channel Change Station Preset PositionFine-Tuning Channels Already Stored Set Stations B When Receiving a Scrambled BroadcastSet Stations a TV Station And ID List TV Station Channel Number Guide Guide Program Number Set Video Plus+ SetupNumber Access Clock SET Screen Clock SetTurn the Recorder on SET Date and TimeStart Clock Operation SET Clock Data Source PresetSET Just Clock Questions And Answers Ä remain lit on the display panel. Is there Problem?Troubleshooting Subsidi ARY Information Error Code Front View Pull the front panel to access covered buttons/connectorsIndex Inside View of Front Panel 3 4 5 6 7 8 9 0 ! @ # $ %Rear View @ # $Display Panel Record PauseRemote Control TV Muting Button mutes soundRemote Control LCD Fast Forward FF Button same as button onManual Channel Setting Manual Tracking Picture Control Power Save Preset DownloadVideo Plus+ Setup Video Plus+ Timer Programming Automatic Satellite Programme RecordingMemo VHF 44.5 143/143 470 MHz Maximum recording timeDR10000EK