JVC HM-DR10000EK Step Auto SET UP, Before performing the following procedure, make sure that

Page 8
AUTO SET
PLEASE WAIT

8

QUICKSETUPGUIDE(cont.)

STEP

3

AUTO SET UP

SET THE TUNER CHANNELS, CLOCK AND GUIDE PROGRAM NUMBERS

The Auto Set Up function sets the tuner channels, clock and Guide Program numbers assigned by the VIDEO Plus+ system automati-

cally the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet.

Before performing the following procedure, make sure that:

the TV aerial cable is connected to the recorder.

the mains power cord is plugged into the mains outlet.

batteries have been installed in the remote control.

 

 

 

1

 

 

 

2

1

 

–:–

 

2

 

 

 

1

2

3

 

4

5

6

3

7

8

9

4

4

 

 

 

 

0

 

 

1

 

 

3

2

 

 

 

Press to turn on the recorder.

If "Auto" appears on the display panel,

press OK or #. "Auto" blinks; do NOT press any button on the recorder or remote control until the display panel shows clock time, "(PR) 1" or

"– –:– –" as illustrated on page 10. Auto Set Up usually takes about 4 – 12 minutes; the duration varies by area.

If you are using the on-screen display, the AUTO

SET screen will appear. As Auto Set Up progresses, the " " mark on the screen moves from left to right.

0 + + +

[MENU] : EXIT

BeginningEnd

ATTENTION

Once you have performed Auto Set Up, all the stored stations and Guide Program numbers remain in the recorder's memory and the recorder will not perform Auto Set Up again. If there is a power cut and the recorder's memory backup expires you only need to reset the clock. (pg. 66)

If you have moved to a different area, perform each setting as required.

Tuner setting pg. 58

Clock setting pg. 66

If a new station begins broadcasting in your area, perform tuner setting (pg. 58).

NOTES:

Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

Auto clock set function sets the clock automatically.

During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets the Guide Program numbers assigned by the VIDEO Plus+ system for those stations according to the broadcast area.

If there is a power cut or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be inter- rupted; be sure to turn off the recorder power once and

press to turn the power back on in order to re-start Auto Set Up.

Image 8
Contents HM-DR10000EK Safety Precautions Connection to the mains supply in the United KingdomSymptoms of dirty video heads Early symptomLate symptom Block noise Still image Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder Connect Video Recorder to TVBack of TV Audio in connectors Mains power inletVideo OUTStep Auto SET UP Before performing the following procedure, make sure thatProgram number set Or remote control until the display panelShows clock time, PR 1 or Auto Set Up results appear on the display panel If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Recording Mode PAUSE/RESUMEVHS/VHS Recording VHSSelect Preset to Watch Engage ITR ModeInstant Timer Recording ITR SET Recording DurationReset Counter SET Counter DisplayDisplay Remaining Time Elapsed Recording Time IndicationAccess Video PLUS+ Screen Access Video PLUS+ ProgramVideo Plus+ Enter Pluscode NumberSET PDC Mode Engage RECORDER’S TimerPDC Recording Return to Normal ScreenExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start TimeSET PDC Mode Timer ModeReturn to Normal ScreenAccess Programme SCREEN/DISPLAY Check, Cancel And Replace ProgrammesDisengage Timer Mode Access Programme Check SCREEN/DISPLAYCancel or Replace a Return to Timer ModeProgramme Return to Normal SCREEN/DISPLAYNavigation To start recording on the blank portion of a tapeAccess Main Menu Screen Access Video Navigation ScreenCheck Memory Return to Normal ScreenAccess Main Menu Access VideoTitle Editing Edit Tape TitleEdit Programme Title And Category Enter CharacterEntering Character To delete, then press Delete Tape DataTape number you want Delete Programme DataDelete Programme Data YES, then press OK or #Access Sorting Screen Sorting By Tape NumberSelect Category Sorting By DateSorting By Category Recording According To Tape Type VHS Super VHS And VHSSelect S-VHS Mode Pointer to Mode SETBy pressing %Þ, then press Move the highlight pointer to S-VHS by pressingS.T. Picture System Access Mode SETSelect B.E.S.T. Mode Or press Record on the recorder RecordingPlayback Manual Tracking Digital TBC/NR S-VHS/VHS Mode OnlyDigital 3R S-VHS/VHS Mode Only Looking For Scene You Want Activate Index SearchSkip Over Unwanted SectionsVHS/VHS mode Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes Type of Broadcast On-screen Display Being ReceivedSoundtrack Selection S-VHS/VHS Mode Soundtrack Selection D-VHS ModeAudio Rec Mode Setting D-VHS Mode Only During PlaybackAutomatic Satellite Programme Recording Satellite Receiver UnitANT. RF OUT Video OUTAccess Mode SET Screen Select AV2 Select ModeEngage Auto Satellite Prog REC Mode SET Tape SpeedRemote Control Functions SET Remote ControlRemote A/B Code Switching CodeTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Receiver Multi Brand Remote Control Brand CodeOperate Satellite Receiver TV Prog +/-,NUMBER keysAccess Mode SET Screen Select Picture Control SET ModeMinimizing Picture Degradation While Editing Picture ControlEdit From Camcorder DV Sound Setting If the camcorder has an S-VIDEO output connectorIf the camcorder has a DV OUT connector Recorder RecorderStart Source Player Input ModeEdit To Or From Another Video Recorder TV Receiver AV mode Your recorderAnother recorder Recorder PlayerAV1 Select Setting AV2 Select SettingSynchro Editing Repeat steps 5 7 as necessaryAccess Initial SET Screen Access Jlip ID NO. SET ScreenTerminal Jlip Joint Level Interface Protocol Connector Information On J TerminalOn-Screen Display ENABLE/DISABLEOther Functions Press %Þ to move the highlight bar pointer to Power Save ModePower SAVE, then press OK or #to set to on Next Function Memory Auto SP→LP TimerAuto Timer Activate Repeat Playback Repeat PlaybackNtsc Playback Connection To Stereo System Audio OUTTuner Set Perform Auto Channel SETAuto Channel Set Pointer to Auto CHScreen preset positions ProceduresAfter Scan Completed Is displayed on the screenStoring Channels Manually Input ChannelEnter NEW Channel Information Close Confirmation ScreenDelete a Channel Change Station Preset PositionFine-Tuning Channels Already Stored Set Stations B When Receiving a Scrambled BroadcastSet Stations a TV Station And ID List TV Station Channel Number Guide Guide Program Number Set Video Plus+ SetupNumber Access Clock SET Screen Clock SetTurn the Recorder on SET Date and TimeStart Clock Operation SET Clock Data Source PresetSET Just Clock Questions And Answers Ä remain lit on the display panel. Is there Problem?Troubleshooting Subsidi ARY Information Error Code Front View Pull the front panel to access covered buttons/connectorsIndex Inside View of Front Panel 3 4 5 6 7 8 9 0 ! @ # $ %Rear View @ # $Display Panel Record PauseRemote Control TV Muting Button mutes soundRemote Control LCD Fast Forward FF Button same as button onManual Channel Setting Manual Tracking Picture Control Power Save Preset DownloadVideo Plus+ Setup Video Plus+ Timer Programming Automatic Satellite Programme RecordingMemo VHF 44.5 143/143 470 MHz Maximum recording timeDR10000EK