Magnavox VPA115AT owner manual Hookups With a Stereo TV, Helpful Hint

Page 10

10 Hookups With a Stereo TV

antenna or cable to ANT(enna) IN Jack

 

 

ANT OUT

 

 

CH3

 

AUDIO

CH4

13.2V

OUTPUT

ANT IN

 

 

VIDEO

 

VIDEO (yellow) and AUDIO (white)

 

 

OUTPUT Jacks

 

 

Video Cable

Audio Cable

Audio and Video IN Jacks on TV

Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCP.

2

Connect a video cable to the yellow VIDEO OUTPUT Jack on the back of the VCP. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUTPUT Jack on the back of the VCP. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. (If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s left and right channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

• This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six-nine and select the channel to be viewed at the TV or the Cable Box (with the VCP turned off).

Image 10
Contents VPA115AT This bolt of lightning indi- cates uninsulated material Dear Philips Magnavox product ownerFor Customer Use Model No Serial NoSafety Precautions FeaturesIntroduction Table of Contents Using the Remote Control Before Using Your VCPPutting Batteries in the Remote Control VCR MaintenanceHookups Without a Cable Box Disconnect the antenna or cable from your TVPlug in the TV and the VCP Hookups Without a Cable Box cont’dYou are ready to turn on the VCP Playing a Tape Hookups With a Cable BoxWatching TV with the VCP Off VCP to the TV’sHookups With a Cable Box cont’d Connect a Cable signal to the VCP’s ANTenna in JackTV Antenna in Jack Hookups With a Stereo TV Helpful HintMobile Connections Remote Control Buttons Display Panel Front Panel Audio Output Jack Video Output Jack AC Power Cord CH3/CH4 Switch ANTenna OUT JackRear Panel ANTenna in Jack 13.2V JackPlaying Picture Control Playback OptionsRepeat Playback PICTurePICTure Control Button Control LightSuper High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Automatic Operation Features Helpful Hints Limited Warranty Model # Serial #Specifications Specifications/GlossaryGlossary Warranty PowerRemote Control Buttons Using Sensor Repeat Light Playback ControlsSupplied Accessories