Magnavox VPA115AT owner manual Playing

Page 16

16 Playing

Before playing a tape, make sure the VCP and TV are connected (see pages six-11). Then, follow the steps below.

1

Turn on the TV. Set it to the same channel as the CH3/CH4 switch on the back of the VCP.

2

Insert a tape in the VCP. The power will come on and play- back will start automatically. The POWER light and the Play light will appear on the display panel of the VCP.

3

If the tape you want to play is already in the VCP, make sure the VCP power is on, then press the PLAY button.

4

To stop playback, press the STOP button.

5

Press the REW(ind)/SEARCH button.

6

Press the EJECT button to eject the tape.

Turn on the TV. Set it to

1channel 3 or 4.

2 Insert a tape in the VCP.

POWER

EJECT

6

3

 

TRACKING

 

 

5

REW/SEARCH

PLAY

FF/SEARCH

 

 

 

STOP

STILL

4

 

 

 

 

Helpful Hints

Other playback options and features are explained on pages 17-19

Moisture may condense inside the unit when it is moved from a cold place to a warm place, after heating a cold room, or when the humidity is high. When moisture has accumulat- ed in your VCP, the POWER light will blink. If you try to play a tape in a VCP in which moisture has accumu- lated, the tape and the VCP could be damaged. If the POWER light is blink- ing, keep the VCP power on (but do not play a tape) for at least two hours. When the POWER light stops blinking, it is safe to play a tape.

Image 16
Contents VPA115AT Dear Philips Magnavox product owner For Customer UseThis bolt of lightning indi- cates uninsulated material Model No Serial NoSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCP Putting Batteries in the Remote ControlUsing the Remote Control VCR MaintenanceHookups Without a Cable Box Disconnect the antenna or cable from your TVPlug in the TV and the VCP Hookups Without a Cable Box cont’dYou are ready to turn on the VCP Hookups With a Cable Box Watching TV with the VCP OffPlaying a Tape VCP to the TV’sHookups With a Cable Box cont’d Connect a Cable signal to the VCP’s ANTenna in JackTV Antenna in Jack Hookups With a Stereo TV Helpful HintMobile Connections Remote Control Buttons Display Panel Front Panel AC Power Cord CH3/CH4 Switch ANTenna OUT Jack Rear PanelAudio Output Jack Video Output Jack ANTenna in Jack 13.2V JackPlaying Playback Options Repeat PlaybackPicture Control PICTurePICTure Control Button Control LightSuper High Speed Searching LP/SLP Forward and Reverse Searching SP/LP/SLPViewing a Still Picture Automatic Operation Features Helpful Hints Limited Warranty Model # Serial #Specifications Specifications/GlossaryGlossary Power Remote Control Buttons Using Sensor Repeat Light PlaybackWarranty ControlsSupplied Accessories