GoVideo DDV9475 manual Sequential/Loop Playback, Set Playback Mode

Sequential/Loop Playback

You can insert two tapes in your Dual-Deck VCR and have them play sequentially or in a continuous loop. For example, you may rent a movie that comes on two videotapes and watch them seamlessly one after the other. You may also set two sales or training tapes to loop continuously.

1 Open “Setup Menu”

Press and hold the menu button on the remote control for 3 seconds.

2 Select “Dual-Deck Features”

Press 4.

3 Set “Playback Mode”

Press 2 repeatedly to set Playback Mode to:

•Normal — Tapes play normally (default setting).

•Seq (Sequential) — The tape in Deck 1 will play to the end, then the tape in Deck 2 will play to the end.

•Loop — The tape in Deck 1 will play to the end, then the tape in Deck 2 will play to the end. While Deck 2 is playing, the tape in Deck 1 will rewind to the begin- ning. This process will repeat continu- ously until you press Stop on the deck in Play.

SETUP MENU

1 ➔ Set Clock Menu

2 : Copy/Record Settings

3 : Tuner And Channel List

4 : Dual-Deck Features

5 : Reset Factory Settings

____________________________________

➔/➔ = Move ➔ = Sel			MENU=Quit
		DUAL-DECK FEATURES
1 ➔ Remote Eject			On
2	: Playback Mode		Normal
3	: Auto Play / Rewind		Both
4	:	Panel Display	Auto
5	:	Screen Display	Auto
6	:	Deck1 Hi-Fi	On
7	:	Deck2 Hi-Fi	On

____________________________________

➔/ ➔ = Move ➔ = Sel MENU=Quit

		DUAL-DECK FEATURES
1	: Remote Eject		On	Normal
2 ➔ Playback Mode			Normal	Seq
3	: Auto Play / Rewind		Both	Loop
4	:	Panel Display	Auto
5	:	Screen Display	Auto
6	: Deck1 Hi-Fi		On
7	: Deck2 Hi-Fi		On
____________________________________
➔/➔ = Move ➔ = Sel			MENU=Quit

PLAYBACK FEATURES 47