GoVideo DDV 2110 manual M E R R E C O R D I N G

6

T I M E R R E C O R D I N G

T I M E R R E C O R D

This Chapter provides step by step instructions

for programming Timer Recordings.

Follow these steps to program your VCR to record up to 16 events.

SET TIMER					or		MENU						1	I N S E R T T A P E
														Insert a blank tape with a record
														safety tab into Deck 1 or Deck 2.
														Record Safety Tab
						MAIN MENU							2	O P E N M A I N M E N U
	1			Copy Settings
														Press MENU.
	2			Playback Settings
	3			Record/Edit Settings
	4			Channel Settings
													3	S E L E C T “ T I M E R R E C O R D I N G ”
	5			VCR Settings
	6			Timer Recording										Press 6 (see notes below).
	7			Language/Langue
	/				= Move		= Sel				MENU = Quit		4	S E L E C T E V E N T N U M B E R
							6							Use the 0-9 keys to enter any available event
														number between “01” and “16.”
													5	S E T D AT E A N D T I M E
					SELECT EVENT [1-16] :01									Use the 0-9 keys or UP/DOWN/RIGHT arrow
1					- - : - - - -		-	- -			- - - / - -
					- H - - M			Ch - -			Deck - - -			keys to set the date and time of the event. To
2					- - : - - - -		-	- -			- - - / - -			correct an entry, press the LEFT arrow key to go
					- H - - M			Ch - -			Deck - - -
														back and then enter the new numbers. To skip
3					- - : - - - -		-	- -			- - - / - -
					- H - - M			Ch - -			Deck - - -			an entry without changing it press the RIGHT
4					- - : - - - -		-	- -			- - - / - -			arrow key.
					- H - - M			Ch - -			Deck - - -			S e t M o n t h
			/		To Move						= Select
														Enter the month as a 2-digit number; e.g., for
					use	0				9	to select			January, press “01.”
											event 01-16
														S e t D a y
														Enter the day as a 2-digit number; e.g., for the
					SET MONTH [1-12] :08									ninth, press “09.”
1				Aug		2001		10:30PM				1H00M
			Su		Mo	Tu	We			Th	Fr	Sa		S e t H o u r
							1			2	3	4		Enter the hour as a 2-digit number; e.g., for
			5		6	7	8			9	10	11		12:00, press “12.”
			12		13	14	15			16	17	18
														S e t M i n u t e
			19		20	21	22			23	24	25
26					27	28	29			30	31			Enter the minute as a 2-digit number; e.g., for
		1-Time				Ch10			Deck 1			Auto		12:00, press “00.”
											to set month, day,			S e t A M / P M
					use	0				9				Press “1” for AM or “2” for PM.
											hour, minute, am/pm

continued...

N O T E S

•You can also select the Timer Recording menu, by pressing SET TIMER on the remote control.

•If you select Timer Recording without having set the clock, the Clock Settings menu will appear. You must set the Clock before you can program a Timer Recording (see page 38).

16

Dual-Deck VCR User’s Guide