C A B L E B O X H O O K U P
Follow these steps if you have a cable box and want to be able to watch a second channel while recording a TV program.
From Cable
Wall Outlet
To Cable
Box Input
Cable Box | TV |
Input Output | VHF/UHF |
|
1 C O N N E C T C A B L E T O T V | 4 T U N E T H E T V |
A L T E R N A T I V E
Connect an RF coaxial cable from the wall outlet to the “IN (FROM ANT.)” jack on the back panel of the DVD+VCR.
2C O N N E C T D V D + V C R T O C A B L E B O X
Connect the RF coaxial cable from the “OUT (TO TV)” jack on the back panel of the DVD+VCR to the Input jack on the Cable Box.
3C O N N E C T C A B L E B O X T O T V
Connect an RF coaxial cable from the Output jack on the Cable Box to the “Antenna In” connection on the back of the TV.
Set the TV to channel 3 or 4, which- ever is used by your cable box.
5T U N E C A B L E B O X
With all three devices turned on, set your Cable Box to channel 3 or 4 (whichever is set on the DVD+VCR), and then press SETUP/ENTER.
6C O N N E C T I O N I S C O M P L E T E !
The “Language/Langue/Idioma” menu will appear on your television screen. Please proceed with Auto Setup on page 3.
N O T E S
•To view cable box channels, set the TV/VCR switch to TV. To watch the DVD+VCR through the RF output, set the TV/VCR switch to VCR and tune channel 3 or 4 on the cable box.
•With this hookup, you can watch scrambled channels, but you will not be able to record them.
34