Daewoo DV-T5DN, DV-T3DN manual 14 CH/TRACKING Up / Down, Slow Up / Down, 17 FF, 23 ATR

Page 6

Overview of the equipment, continued

13EJECT

Press to eject a video cassette from the compartment.

14CH/TRACKING(Up / Down)

Press to change the channel (channels stored in memory only) or to adjust the tracking.

15SLOW(Up / Down)

Press to allow slow-motion playback.

16INPUT

Press to select between the VCR tuner and the Audio/Video Input jacks. (auxiliary).

17FF

Press to fast forward a video cassette.

18CM SKIP

Press during playback mode to skip commercials or program segments.

19TV/VCR

Press to select the TV or VCR tuner.

20PROGRAM

Press to go directly "TIMER RECORDINGS" in MENU.

21DISPLAY

Press to display the tape counter, clock and status mode on the TV screen.

22CHILD LOCK

Press to disable VCR usage or to protect set timer recordings, the unit can be locked so that the buttons on the VCR or remote control don't work.

23ATR

Press to remove any streaks from the picture automatically.

Overview of the equipment, continued

Installing the remote control batteries

1Open the battery compartment on the back of the remote control.

• Do not mix different types of batteries, or mix an old and a new battery.

Remove and replace weak batteries. Weak

batteries can leak and

2 Install two AAA size batteries as shown. Make sure

damage your controller.

the “+” and “–” terminals are oriented correctly.

Dispose of batteries

 

properly; never throw

+

them into a fire.

 

 

+

3Replace the cover.

Using the remote control

Hold the remote control within an angle range of about 30° from either side of the remote sensor. The remote control range is about 23 feet (7m) from the VCR.

Point the front of the remote control directly at the front of the VCR.

5

Daewoo Video Cassette Recorder User’s Guide

Daewoo Video Cassette Recorder User’s Guide

6

Image 6
Contents Video Cassette Recorder Safety information Important SafeguardsContents Cassette compartment Overview of the equipmentOverview of the equipment Display panel100 Selections when using the menu systemAntenna terminal Select channels greater than17 FF 14 CH/TRACKING Up / DownSlow Up / Down 23 ATRConnecting your VCR You may have two sets of leads from your antenna systemANT. in terminal on the back of your VCR Connecting your VCR Terminal Setting up your VCR Setting up your VCRTurn on the television Press Menu to display the menu Press 3 to select Channel Set Press 2 to select Add/Remove Channels Using video cassettes Watching recorded programs Watching recorded programsTo stop a video cassette, press Stop Recording programs Press 1 to select Timer RecordingsRecording programs Press Menu to display the menuReviewing timer programs Using advanced features Using advanced features Press 4 to choose Functions Press 4 to display Go-To SearchSpring Forward Fall Backward Glossary Troubleshooting TroubleshootingSpecifications Warranty