Recording programs, Or 4 for Weekly | Daewoo DV-T5DN, DV-T3DN

Recording programs, continued

Recording programs

You have three options for recording TV programs:

Manual, Timer, and One touch recording.

✔Timer recording allows

Timer recording

There are four timer modes: One time, Daily, Weekdays, and Weekly

1 Be certain to do the steps in the section, “Preparing

✔See “Selecting cable or antenna viewing. “p.15, for information on setting the viewing mode.

Preparing to record a program (manual or timer)

Before you begin recording: •Turn on the television.

•Set the TV to channel 3 or 4 or to the video input. •Insert a video cassette (with a safety tab) into the VCR. •If the VCR indicator is not lit, press TV/VCR.

•If your VCR is connected to:

you to record up to eight different programs within one year period.Once you have set the timer for timer recording, the VCR will turn on, record the program you selected, and then shut off automatically.

	to record a program,” as shown on previous page.
2	Make certain the clock is set to the correct time.
3	Press MENU to display the menu.
4	Press 1 to select Timer Recordings.

✔Press P/S if you would like to momentarily stop the recording. Press REC/OTR to resume recording. If you do not press REC within five minutes of pressing P/S, the VCR will automatically release the pause and stop the recording to prevent damage to the tape.

–an antenna, set the viewing mode to “ANTENNA.”

–a cable system, set the viewing mode to “CABLE.”

Manual recording

Watching and recording the same channel

To watch and record the same channel:

1Be certain to do the steps in the section, “Preparing to record a program,” above .

2Use 0-9 or CH/TRACKING to select the channel number.

3Press SPEED to select the recording speed.

4Press REC/OTR to begin recording. The REC indicator lights.

5Press 1 to select Make a New Program.

6 Press 1 for One Time; 2 for Daily; 3 for Weekdays,

or 4 for Weekly.

✔Since the VCR has its own TV tuner, it is not necessary to turn on the TV in order to make a recording. Turning on the TV merely allows confirmation of proper channel settings on your VCR.

• Press STOP to stop the recording.

Watching one channel and recording another

1Perform steps 1-4 in “Watching and recording the same channel,” above.

2Press TV/VCR to switch to TV mode.

3Use the television’s remote control to select the television channel you want to watch. The VCR will continue to record the program.

✔If the VCR is in cable box setup mode, the preset channel number will be displayed automatically.

7 Use 0-9 to enter the channel number to record.

While the VCR is in the CABLE mode, if a channel

over 100 is desired, press 100’s key and then the

next 2 digits in order.

Daewoo Video Cassette Recorder User’s Guide

Recording programs, continued