Connecting your VCR | Daewoo DV-T5DN, DV-T3DN specs

Connecting your VCR, continued

VCR

ANT.IN

•If your antenna system has two sets of twin 300-ohm leads, purchase a combiner (available at electronics stores). Place one set of twin leads underneath the screws on the combiner and tighten the screws. Do the same with the other set of twin leads. Press the cable from the combiner onto the ANT. IN terminal on the back of your VCR.

VCR

ANT.IN

Connecting your VCR to your TV

1Connect one end of a coaxial cable to the RF OUT terminal on the back of the VCR.

2Connect the other end of the coaxial cable to the

ANT. IN terminal on the back of the TV.

.IN IN

Connecting your VCR, continued

•If you have a coaxial terminal for VHF signals and twin lead terminals for UHF signals, you need an adapter(Not supplied) as shown below:

.	TV
	VHF

•If you have twin lead terminals for all signals, you need an adapter(Not supplied) like this:

If your TV does not have Audio/Video inputs, you have finished connecting your VCR to your TV. If your TV does have Audio/Video inputs, you may want to follow the section below.

Connecting to a TV with Audio/Video inputs

1Connect a video cable to the VIDEO OUT terminal on the back of the VCR.

2Connect the other end of the video cable to the VIDEO IN terminal on the TV.

	TV	IN
	TV
.	.	IN

Daewoo Video Cassette Recorder User’s Guide