SAFETY&PRECAUTIONS
4.Leakage current test
Confirm specified or lower leakage current between B(earth
ground, power cord plug prongs) and externally exposed accessi- ble parts (RF terminals, antenna terminals, video and audio input output terminals, microphone jacks, earphone jacks, etc.)
Measuring method:(Power ON) Insert load Z between B(earth ground, power cord plug prongs) and exposed accessible parts. Use on AC voltmeter to measure across both terminals of load Z. See figure2 and following table.
Leakage current ratings for selected are as
AC Line Voltage | Region | Load Z | Leakage Current(i) | Clearance Distance(d),(d’) |
100V | Japan | 1kΩ | i*1mArms | Exposed accessible parts |
|
|
|
| |
110 to 130V | USA &Canada | 15kμF | i* 0.5mArms | Exposed accessible parts |
|
| 1kΩ |
|
|
|
|
| i*0.7mA peak | Antenna earth terminals |
|
| 2kΩ | i*2mAdc | |
110 to 130V | Europe |
| ||
|
| |||
200 to 240V | Australia |
| i*0.7mA peak |
|
|
|
| Other terminals | |
|
| 50kΩ | i*1mAdc | |
|
|
| ||
|
|
|
|
NOTE
This table is unofficial and for reference only. Be sure to confirm the precise values for your particular country and locality.
3