SC4H/UF
ON-SCREEN MENU
Displaying the VCR Setup Menus
Before starting
œTurn on the power (TV and VCR).
œSet the TV to channel 3 or 4.
œPress the VCR button on the remote control to select the VCR operation mode.
œIf the VCR indicator is off, press the TV/VCR button on the remote control.
The VCR indicator lights.
1Press the MENU button on the remote control. The main MENU appears.
2Press the ù (or û) button to select the VCR setup option, then press the OK button.
The VCR setup menu appears.
CATV/TV@@@@@@@zCATV@TV
Cable@box@@@@@zNo@@@Ch02
MTS@@@@@@@@@zST@SAP@Mono
Audio@out@@@zST@L@R@Mono
Child@Lock@@@@@On@@zOff
Off@timer@@@zOff@2Hr@6Hr
Auto@AV@Select@On@@zOff
[ùû]†Option [<>]†Select@@@[MENU]†TV
3Press the ù (or û) button to highlight the desired option.
4Press the > (or <) button once or more to move the “z” indicator in front of your selection.
5When finished, press the MENU button to save the settings.
VCR Setup Menu Options
Reference pages are shown in square brackets.
CATV/TV [21]
œIndicate whether you subscribe to cable TV or use antenna.
Cable box [12, step 9]
œIf you use a cable converter/decoder (cable box), set the output channel.
MTS [29]
œSelect the MTS (Multichannel TV Sound) mode - stereo, SAP or mono.
Audio out [30]
œSelect the audio output mode.
Child Lock [38]
œSelect this to block picture and sound.
Off timer
œSelect this to set the VCR to automatically shut off after a specified period of
Off: The power will not be turned off automatically.
2Hr: The power is turned off after 2 hours.
6Hr: The power is turned off after 6 hours.
NOTE: The Off timer begins counting down after the last VCR activity. Approximately 5 minutes before the power is turned off, the “Your VCR will be off shortly” message is displayed.
Auto AV Select
œTurn on and off the A/V output on the rear panel when the VCR power is off.
On: The input signal at the front A/V input jacks is sent to the rear A/V output jacks.
Off: No output signal when the VCR power is off.
BASIC OPERATION
18