12 Setup
2.4.2 Connecting to your television
Between all the following connectors of the digital receiver, we recommend you to use the first connector to get best picture quality. If your television does not have the matching connec- tor then use the next connector in the following order for best picture quality.
1.HDMI connector (HDMI)
2.Component connector (YPbPr)
3.RGB connector (RGB)
4.
5.Composite connector (VIDEO)
You should configure audio and video settings after connect- ing up the digital receiver. See § 3.1 for detailed description.
To use the HDMI connector
If you have a high definition television set, you should use a HDMI cable for best re- sults. Plug one end of the cable into the HDMI socket on the digital receiver, and the other end into the matching socket on your television. In this case, you do not have to make audio connections because the HDMI connector can output stereo audio or Dolby digital audio.
To use the component video connector
Y
Pb Pr
You will need to obtain a component video cable (RCA cable) to use the component video connector. Plug one end of the ca- bles into the Y (green), Pb (blue) and Pr (red) sockets on the digital receiver, and the other end into the matching sockets on your tele- vision.