14 Setup
NOTE
You cannot view high definition video with the composite video connector.
To connect the audio connectors
You will need to obtain an audio cable (RCA cable) to connect the audio connectors. Plug one end of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital receiver, and the other end into the matching sockets on your television or au- dio system.
To enjoy Dolby digital audio, your televi- sion or audio system must be able to de- code Dolby digital audio, and you will need to obtain a S/PDIF cable. If you want to use the COAXIAL connector, prepare a coax- ial S/PDIF cable (RCA cable); otherwise, to use the OPTICAL connector, prepare an op- tical S/PDIF cable. Plug one end of the ca- ble into the S/PIDF socket on the digital re- ceiver, and the other end into the matching socket on your audio system.
2.4.3 Inserting batteries in the remote control
To insert the batteries, open the battery compartment by re- moving the lid, and then insert the batteries observing the po- larity, which is marked on the base of the battery compart- ment.
If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be flat. Be sure to remove used batteries. The manufacturer accepts no liability for dam- age resulting from leaking batteries.