Topfield TF3000FEI, TF3000FI manual Troubleshooting Q & a, Problem Possible Causes What to do

Page 48

TROUBL ESHOOTI NG(Q & A)

TROUBLESHOOTING (Q & A)

	Problem	Possible Causes	What to do

	Nothing appears on the	The main power cable	Check that the main power
	Nothing appears on the	The main power cable	cable is plugged into the power
	Front Panel.	is not connected.	cable is plugged into the power
	Front Panel.	is not connected.	socket.
			socket.

	No sound or picture, but
	the front panel shows the	STB is in standby mode.	Turn the power ON.
	time or -- : --

		The satellite dish is not	Adjust the dish.
		pointing at the satellite.	Check the settings in one of
	No Picture, No Sound.	No Signal or Weak Signal.	the channel search submenus.
	No Picture, No Sound.	LNB is faulty.	Check the cable connections.
		LNB is faulty.	Check the cable connections.
		The UHF Key is	Replace the LNB.
		pushed down .	Get out of the UHF mode.

		No Batteries.	Change the batteries (both).
	The Remote Control Unit	The RCU is incorrectly	Aim the RCU properly to
	The Remote Control Unit	aimed.	the STB.
	(RCU) is not working.	aimed.	the STB.
	(RCU) is not working.	The STB is in standby	Change the mode to the
		The STB is in standby	Change the mode to the
		mode.	normal mode.

	You have forgotten your		Contact your Service Provider.
	secret PIN Code.		Contact your Service Provider.
	secret PIN Code.

	Time Setting is wrong.	The Time is not set properly.	Adjust the Time on the Menu.

	2 broadcasts overlap.	The channels are not	Set the channels in the RF mode
	2 broadcasts overlap.	configured properly on the	under the A/V setting of the
		RF mode.	Menu between 21 to 69 on the TV.

Image 48

Contents Non-SCART model Scart modelTable of Contents Warni NG Introduction Contents FeaturesFront / Rear Panels Front PanelLNB Scart model Remote Control Unit RCU Selects the subtitle language list for the current service Installation Connection Connection to the TV using the RF cableConnection to the TV with the Cinch Cable Connection to the other Satellite Receiver Scart model Instal Lation Under the Installation Menu of the M a i n Menu Getting StartedInformation Box EPG Electronic Program GuideSubtitle TeletextSoundtrack Menu Operations Menu Operations System Setting Time SettingLocal Time Setting ModeLocal Time GMTTimer Time OffsetWakeup Time Power Off Time Wakeup ChannelSleep Time Menu Operations Parental Control CensorshipChange PIN Code Access Control Menu Operations Language Setting A/V Output Setting TV TypeTV Aspect Ratio Sound Mode Display FormatUHF Type UHF ChannelInfo Box Display Time Info Box PositionMenu Operations II. Organizing Channels BrowseRename MoveLock SkipDelete Is to perform a new channel search SortMenu Operations III. Organizing Favorites Menu Operations IV. Installation IV-1.LNB SettingLNB Power Satellite NameLNB Frequency 22 KHzDiSEqC Channel SearchIV-2. Channel Search Menu Operations Search Mode Symbol RateFrequency PolarizationPID PCR PIDSave LNB Setting Start SearchIV-3 . Motorized DiSEqC Motor Control IV-4. SAT/Tp EditSat Name Edit Av e and Space in the keyboardAdd New TP Delete TPAdd Satellite Delete SatelliteIV-5. Factory Setting IV-6.Transfer Program to Other IRDIV-7.Transfer Data to Other IRD Menu Operations Inforamtion IRD StatusMenu Operations Calendar Menu Operations Game 1. Block 2. Poker3. Bricks Lay 4. Bomb Hexa Troubleshooting Q & a Problem Possible Causes What to doSpecificationsird STB Specifications SpecificationChannel Processing Specificationsird Mpeg Audio Video SpecificationsPower Supply