Rosen G8 Owner’s Manual
DVD TYPICAL SETUP AND CONFIGURATION
Changing the Aspect Ratio Mode
SYSTEM SETUP
The following section explains how to customize various features of the Internal DVD Player, including various language, display, and parental control features.
Note: Many DVD menu settings do not apply to this system, since it is specifically engineered for automotive use. Changing the state of some settings can cause apparent system failure. Don’t change any settings other than those
This is under the SYSTEM SETUP tab, under TV TYPE. The correct setting is WIDE. Changing this setting to NORMAL/PS or NORMAL/LB will result in distorted video.
TV SYSTEM |
VIDEO |
TV TYPE |
PASSWORD |
RATING |
DEFAULT |
EXIT SETUP |
4:3 PS |
4:3 LB |
16:9 |
described in this section.
Changing the Video Output Mode
To change the video output mode, select
SYSTEM SETUP
A DVD disc must be loaded to access the Internal DVD settings.
1Press SOURCE SETUP.
2Use the Left and Right arrow buttons to select a page.
3Use the Up and Down arrow buttons to select the setting to change.
SYSTEM SETUP, and then select TV SYSTEM. The default is NTSC. If you want to be able to play PAL discs on your NTSC monitors, select PAL. If you change this setting and the picture “rolls”, see your
Rosen dealer.
TV SYSTEM |
VIDEO |
TV TYPE |
PASSWORD |
RATING |
DEFAULT |
EXIT SETUP
NTSC |
PAL60 |
PAL |
AUTO |
4Use the Left and Right buttons again to change the value of the setting.
SETUP MENU |
SYSTEM SETUP
TV SYSTEM | SETUP | |
SETUP | ||
TV TYPE | ||
SETUP | ||
PASSWORD | S |
RATING |
DEFAULT |
EXIT SETUP
EXIT SETUP
Note: The setting “AUTO” will automatically output NTSC video from NTSC discs, and PAL video from PAL discs. NTSC is the North American standard. Some discs may not play properly when AUTO is selected.
The Digital Output Setting
There is a setting in the menu for a Digital Audio output under DIGITAL SETUP. This unit does not have a digital audio output. Leave this setting in the ANALOG mode.
Note: Enabling the Digital Audio mode disables the analog
:audio output used by the FM Modulator and the IR head- phones, and can resemble a system audio failure.
20