Rosen Entertainment Systems 410X Care and Maintenance, FCC Approval, Handling Discs, Liquids

Page 3

FCC Approval

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to consult the dealer or an experienced radio/TV technician for help.

CARE AND MAINTENANCE

Handling Discs

Always handle a disc by its edges. Never touch the surface of the disc directly. To remove inadvertent fingerprints and dust, use a soft cloth and wipe in a straight line from the center of the disc to the outside edge. Never use liquid or aerosol cleaners, anti-static spray, or thinner to clean the disc surface. Do not place discs in the following places: direct sunlight; dirty, dusty and damp areas; near car heaters; on the seats or dashboard. Avoid using adhesive labels on discs.

Liquids and the 410X

Keep all liquids, including beverages and cleaning liquids, away from the 410X. Liquids inside the player can damage the electronics, and result in electrical shock or fire. If the unit or the remote control should become wet, turn off all power and contact an authorized Rosen/necvox dealer to have the system inspected.

Servicing the 410X

This unit uses a precision mechanism. In the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts.

410X 3

Image 3
Contents Table of Contents About InstallationAccessories Supplied with IntroductionAbout the Registered Marks Liquids Care and MaintenanceFCC Approval Handling DiscsDVD Regions Temperature and MoistureDiscs Played by Discs Compatible withUsing Discs Incompatible withRegion Icons Previous Front-Panel ControlsUsing the Remote Control Remote ControlStopping Playback DVD/VCD/CD-AUDIO PlaybackInserting a DVD/VCD/CD Disc PlaybackViewing Angles Pausing PlaybackRepeat Mode Fast Searching During PlaybackParental Control Supported MP3 File Formats What is MP3?MP3 Playback on CD-R Discs MP3 PlaybackFile Extensions Installation and Wiring Before Starting Package ContentsInstallation Requirements Installing into the DIN Sleeve InstallingRemoving the 410X from the DIN Mounting Sleeve Installing into a Fixed In-Dash MountSome cases the factory trim panel may require some slight Wiring 410X Rear-panel Connections Only USE the FOUR-PIN Connector Supplied with this UnitFM Mod 410X in a typical systemSetup 410X Typical Setup and ConfigurationChanging Settings Changing the Video Output Mode Changing the Aspect Ratio ModeActivating Captions and Subtitles Concealing the Angle MarkSelecting an Lpcm Output Frequency Activating the Digital OutputDeactivating the Smart Nav On-Screen Menu Display Changing Language SettingsTo change the disc menu language, select Preferences General Setup Options ListPicture rolls TroubleshootingSpecifications Tinny sound