7 Configuration | Sun Microsystems, Inc. |
Netbackup Configuration
The X4500 will be configured as a Media Server. In this example, it is assumed that there is a separate Master NBU server.
The Netbackup and Media Manager package must be installed on the X4500. It also will require the appropriate server licensing.
It is recommended that the Master server's bp.conf file be updated with the new Media server information before installing the software on the media server. An example is shown below.
The supported installation method is using the install script that comes with the Netbackup Installation media.
root@thumper1
Symantec Installation Script
Copyright 1993 - 2007 Symantec Corporation, All Rights Reserved. Installing NetBackup Server Software
NOTE: To install only NetBackup Client software locally on this machine
or to load additional UNIX client software on this server, insert the NetBackup UNIX Clients cdrom.
Do you wish to continue? [y,n] (y) y
NetBackup installs to the running root environment, by default. Are you installing to the running root environment? [y,n] (y) y
Processing package instance <SYMCnetbp> from
(... rest of the installation output omitted for brevity...)
After the installation process prompts for the license key and the key is properly entered, the following questions need to be answered
Would you like to use "thumper1" as the configured name of the NetBackup server? [y,n] (y) y
Is thumper1 the master server? [y,n] (y) n
What is the fully qualified name of the master server?
The previously installed master server name should be entered. In this example, the master server name was
After the package is installed on the X4500. The Master Server EMM database must be updated with the new Media Server information.
From the Master Server command line:
#/usr/openv/netbackup/bin/admincmd/nbemmcmd
NBEMMCMD, Version:6.5 Command completed successfully.