Rosen Entertainment Systems AC3003 DVD Typical Setup and Configuration, Press Source Setup

Page 22

Rosen A8 Owner’s Manual

DVD TYPICAL SETUP AND CONFIGURATION

The following section explains how to customize various features of the Internal DVD Player, including various language, display, and parental control features.

Note: Many DVD menu settings do not apply to this system, since it is specifically engineered for automotive use. Changing the state of some settings can cause apparent

Changing the Aspect Ratio Mode

This is under the GENERAL tab. The correct setting is WIDE. Changing this setting to NORMAL/PS or NORMAL/LB will result in distorted video.

- - GENERAL PAGE - -

TV DISPLAY

NORMAL/PS

OP MODE

NORMAL/LB

ANGLE MARK

WIDE

OSD LANG

CAPTIONS

SCR SAVER

MAIN PAGE

system failure. If you have questions about the original state of any DVD setting, please see the list on page 24.

To change the settings for the internal DVD Player:

1Press SOURCE SETUP.

2Use the navigation arrow buttons to highlight a selection.

3Press the ENTER button to confirm your selection.

Changing the Video Output Mode

To change the video output mode, select GENERAL, and then select TV TYPE. The default is NTSC. If you want to be able to play PAL discs on your

NTSC monitors, select PAL.

- - PREFERENCES PAGE - -

TV TYPE

MULTI

SUBTITLE

NTSC

AUDIO

PAL

 

SUBTITLE

DISC MENU

LOCALE

PARENTAL

SETUP MENU -- MAIN PAGE

GENERAL SETUP

SPEAKER SETUP

AUDIO SETUP

PREFERENCES

Note: The default setting “MULTI” will automatically output NTSC video from NTSC discs, and PAL video from PAL discs. NTSC is the North American standard. Sme discs do not play properly when MULTI is selected.

EXIT SETUP

If you try to perform an action that is not permitted (such as access- ing the Preferences menu while a disc is playing), the on-screen display will use the following symbol:

The Digital Output Setting

There is a setting in the menu for a Digital Audio output. This unit does not have a digital audio output. Leave this setting in the ANALOG mode.

Note: Enabling the Digital Audio mode disables the analog audio output used by the FM Modulator and the IR headphones, and can resemble a system audio failure.

-- AUDIO SETUP --

AUDIO OUT

ANALOG

OP MODE

SPDIF/RAW

DUAL MONO

SPDIF/PCM

DYNAMIC

PRO LOGIC

LPCM OUT

MAIN PAGE

22

Image 22
Contents DVD Entertainment System Page About the Registered Marks Page Table of Contents Watching Video Switching On, Lowering and Adjusting the ScreenSecond, to adjust the screen angle ThirdConsole-mounted Jack Locations Using the Dome LightsFront View To Use An External Video SourcePrecautions IntroductionDiscs Played DVD RegionsButton Dome LightUsing the Remote Control 10 11Basic Remote Control Buttons Using Menu and Navigation Buttons Using Audio ButtonsReplacing the Remote Battery Using DVD Disc FeaturesChanging the Shape and Size of the Image MP3 Playback CD Audio and MP3 PlaybackCD Playback MP3 Disc Recording and File ExtensionsUsing the Included Wireless Headphones Listening Over the CAR SpeakersRosen Entertainment Sound Features Using Optional Wired HeadphonesReplacing Headphone Batteries Using External Sources Watching Broadcast TelevisionOptional Rosen Accessories What can I do about Black Bars ? 661 169 851 Letterbox WidescreenEliminating Black Bars When Viewing a DVD Press Source Setup DVD Typical Setup and ConfigurationChanging the Aspect Ratio Mode Changing the Video Output ModeTo change the soundtrack lan- guage, select Preferences Changing Language SettingsParental Control To change the disc menu languageActivating Captions and Subtitles DVD Setup Options ListConcealing the Angle Mark Deactivating the Smart Nav MP3FAQ’S Have no Picture and no Sound WHAT’S WRONG?Page Page RES PN 9100 236 Rev a