GETTING STARTED
Switching On, Lowering and Adjusting the Screen
Use the system only when the vehicle is running, or with the ignition key switch in the “accessory” position.
First, press the OPEN button on the front panel, or on the remote. The screen will deploy.
OPEN | ENTER |
SOURCE
Watching Video
To Watch a DVD:
1Press EJECT twice to remove any loaded disc.
2Insert a DVD onto the slot, label side up.
3Most DVD discs begin playback automatically. If a menu appears,
press PLAY or ENTER as instructed on screen.
Second, to adjust the screen angle,
gently pull the screen towards you an inch or so, and hold it there with one hand. 
Third,
while holding the screen, move the adjuster slider left or right with your other hand.
Note: While a disc is playing, the Stop/Eject button on the front panel acts as a Stop button. To eject a disc while it is playing, press the Stop/Eject button twice in quick succession. The Eject button on the remote should always eject the disc immediately.
To Watch Broadcast Television (with optional TV tuner):
1 Press SOURCE until “TV Tuner “ and a channel number (for |
example, “2” ) appear on the screen. If no channel number |
appears, press the POWER button on the remote. |
Finally, let go of the screen and
2 To change channels, press NEXT or PREVIOUS on the front |
panel, or UP CH and DOWN CH on the remote. |