Topfield TF 600 PVRt manual Recording a programme, Instant recording

Page 51

7.1 Recording a programme 45

7.1Recording a programme

Once recording has started, a symbol like the left ﬁgure will be displayed at the top right of the screen for a few seconds. When you are watching a service different

from the service being recorded, you can view a number on the centre of the symbol, which indicates the order that the recording is started.

To record two programs simultaneously, two tuners are allo- cated for the recording. Therefore, you can only change to a limited number of services while the two programs are being recorded.

CAUTION

Do not move the digital receiver nor pull out the plug while it is running. It may cause damage to recorded programmes. Note that Topﬁeld is not responsible for damages inﬂicted on ﬁles that are stored on the hard disk drive.

NOTE

When a recording is complete, it might not be saved if its recording duration is less than one minute.

7.1.1 Instant recording

To instantly record the programme you are watching at present, press the button. Pressing the button will not pause the current recording like it does with a video cassette recorder.

Image 51

Contents TF 600 PVRt Page Contents Service Search Listing Services Index Introduction FeaturesControlling the digital receiver Front panel Remote control Mo e Is used to set a sleep timerMutes the sound. Press again to swit h it back on Vices Switches the output of the TV Scart socket beDisplays teletext DetailsTo specify a block for editing or for repeated playback § 5.6 for information about picture-in-pictureShift Forward 30 secondsWhat is common interface? Setup Safety precautionsUnpacking Safety precautions TF 600 PVRt has a wide range of connections on the back Rear panel connectionsConnecting up your digital receiver Connecting to your television Connecting the antennaTo use the Hdmi connector To use the S-Video connector Connecting to your video cassette recorder Switching on for the ﬁrst timePowering on and checking picture Inserting batteries in the remote controlLanguage settings Preference SettingsSubtitle language Video and audio settings Television standardColour model Television aspect ratio Video cassette recorderVideo and audio settings Audio mode High deﬁnition televisionVideo scaling Parental control Local time settingPreference Settings Time offset table City Adjusting the on-screen display To turn on the time shift feature Searching broadcasting services Service SearchFactory reset will not delete any recorded programmes Resetting to factory settingsWatching television Volume controlTo view the services list, press the OK button Daily UsageDaily Usage Favourite services list Viewing programme information Some programmes are provided with audio tacks in one or Selecting audio tracksButton. To hide the teletext screen, press the Exit button Viewing electronic programme guideSelecting subtitle tracks Viewing teletextWatching multifeed programme Using time shiftDaily Usage Using picture in picture Daily Usage Listing Services Editing the services listService to edit on Right column. To go over to the other It back to be unlocked Editing the favourite list Favourite list. You can delete a favourite entry with How to use on-screen keyboardRepeat this step to add more entries Button and the highlight bar get moved toTurn on the source digital receiver Transferring receiver dataRecording and Playing Instant recording Recording a programmeRecording and Playing Timer recording Recording and Playing Recording a programme Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme Yes, it will be deleted File archiveTo delete a recording To sort recordingsTo lock a recording To rename a recordingTo move a recording to another folder To navigate using the progress bar Playing back a recordingFirst press the button to display the progress bar, then To play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Conﬁguring the router IP conﬁguration Advance conﬁguration To apply your chosen proﬁle, set the Activate option to On ProﬁlePage Accessing the web server Accessing the web server Accessing the FTP server Accessing the FTP server Topﬁeld Application Program Page Checking the ﬁrmware information Firmware UpdateFrom your computer via USB port From another digital receiver via RS-232 port From your computer via RS-232 portTurn off the target digital receiver Index RF Loop 1 OUT RF Loop 2 OUT Wlan ANT Page Correct disposal of this product