DCT3080 Installation Manual
When the LED display is blank, the terminal is ready for initialization and service authorization using the addressable controller. Verify that the terminal is powered up or reset within two minutes of a completed download.
Boot Cycle Error Codes
If hardware or software problems occur, the terminal displays error
codes on the LED display. Table125H2-5 lists error codes that can occur during boot cycle startup:
Table
Boot cycle error codes
Code | Description | When Error Occurs | Action Required |
Eb | Object failed | After the LED displays dl, | Contact headend |
01 | validation | indicating validation check | operator |
|
| failed |
|
Eb | Download | After cycling twice through the | None |
02 | OOB frequencies |
| |
|
| ||
Eb | Flash erase | After software object | Replace the terminal |
03 | failed | download complete and EF is |
|
|
| displayed |
|
Eb | Flash | After software object | Contact headend |
04 | programming | download complete and FP is | operator |
| failed | displayed |
|
Eb | Invalid DLC | After the LED displays dl, | Contact headend |
05 | frequency | indicating validation check | operator |
|
| failed |
|
Eb | Hardware | After plugging the terminal | Replace the terminal |
06 | initialization | into an electrical outlet to |
|
| failed | begin the boot cycle |
|
34
