Motorola manual DCT3080 Installation Manual Boot Cycle, Display, Description

DCT3080 Installation Manual

Boot Cycle

After connecting the proper cabling to the DCT3080, plug the power cord into the DCT3080 and electrical wall outlet. Begin performing the boot cycle procedure:

ƒAfter a few moments, the LED displays HUNT and then FR 1.

ƒThe DCT3080 searches for the headend out-of-band (OOB) frequency carrier. If the OOB frequency is not set to 75.25 MHz, the LED flashes FR 1 and then flashes FR 2. This searching process repeats until the correct OOB frequency is found and the required message for the DCT3080 model is acquired.

ƒThe LED displays and OOB frequencies are:

Table 2-4

LED displays and OOB frequencies

Display	Frequency	Description
dl	N/A	OOB network download in progress
EF	N/A	Erasing Flash memory
FP	N/A	Flash memory is being programmed
____	N/A	Network download complete
Hunt	N/A	Hunting for OOB frequency
FR 1	75.25	Attempting to lock on frequency 1
	MHz
FR 2	104.20	Attempting to lock on frequency 2
	MHz
FR 3	72.75	Attempting to lock on frequency 3
	MHz
FR 4	92.25	Attempting to lock on frequency 4
	MHz
FR 5	98.25	Attempting to lock on frequency 5
	MHz
FR 6	103.75	Attempting to lock on frequency 6
	MHz
		32