DCT3080 Installation Manual
The DVR/Hard Drive Status fields are:
FieldDescription
Enabled | Indicates whether the DVR is enabled, based on the DCT3080 | ||
| Connected State (CONNECTED or DISCONNECTED) and | ||
| resource availability (resource authorized; hard disk installed | ||
| and functional): |
| |
| OSD | LED | Description |
| True | En | DVR enabled |
| False | Un | DVR disabled |
Stream | The stream indexer version number, without leading zeros; for | ||
Indexer Ver. | example, version 0000000065 is displayed as “65” | ||
Content | The content record version number, displayed without leading | ||
Record Ver. | zeros |
|
|
Number | Indicates the encoder number — 1 or 2 | ||
Type | Indicates the encoder type — Not Inst(alled), MPEG2, Other, or | ||
| Unknown |
| |
Drive | The drive type — IDE (internal), 1394, USB (external), or NOT | ||
| AVAILABLE (neither enabled nor configured) | ||
Record | The remaining recording capacity, in bytes | ||
Capacity |
|
|
|
Remaining |
|
|
|
Number of | The number of internal and external hard drives, up to a | ||
Installed | maximum of 9 |
| |
Drives |
|
|
|
Drive | The identification number sequentially assigned to each | ||
| installed drive and whether the drive is INTERNAL or | ||
| EXTERNAL |
| |
Model | The drive model number assigned at the factory | ||
Number |
|
|
|
Device ID | A text string of up to 20 characters that identifies the disk drive; | ||
| “N/A” is displayed if the value is invalid or cannot be retrieved | ||
Type | The drive type — IDE, 1394, USB, or Unkn(own) | ||
Total Size | The drive size in decimal GB. (1 decimal GB = 1x109 bytes. For | ||
| example, 120 decimal GB = 120x109 bytes.) | ||
|
|
| 72 |
