Motorola DCT3080 manual Oob, Snr, Agc, Emm

DCT3080 Installation Manual

The Out-Of-Band Status fields are:

Field Description

OOB	Indicates the OOB tuner center frequency, from 70 to 130 MHz.
Frequency
Carrier	Indicates whether the OOB receiver is locked to the carrier:
Lock
	OSD	LED	Description
	YES	L	Carrier locked
	NO	U	Carrier unlocked
Data	Indicates whether data is being carried by the OOB and EMM
	traffic, which is tracked separately:
	OSD	LED	Description
	YES	On	OOB data detected within last 5 seconds
	NO	Off	OOB data not detected within last 5 seconds

EMM Data Indicates whether EMM data is being carried on the OOB stream:

	OSD	LED	Description
	YES	On	EMM data detected within last 5 seconds
	NO	Off	EMM data not detected within last 5 seconds
SNR	When carrier lock has been established, displays an estimate of
	the carrier signal-to-noise ratio in dB, with an explanation:

ƒGOOD — Good value

ƒFAIR — Marginal signal level; check the signal

ƒPOOR — Unusable signal

ƒINVALID — Invalid SNR value

AGC	When carrier lock has been established, displays an estimate of
	the AGC as a percentage, with an explanation:
	ƒ GOOD — Good value
	ƒ FAIR — Marginal signal level; check the signal
	ƒ POOR — Unusable signal
	ƒ INVALID — Invalid AGC value
EMM	Displays the conditional access stream for the DCT3080, in
Provider	hexadecimal
ID
	47