IR-.904NAENG09L007R200-.904NA. -10-14- 153jc

Sherwood R-904N manual IR-.904NAENG09L007R200-.904NA. -10-14- 153jc

•IR-.904N(A)_ENG_09L007:R200-.904N(A). -10-14-_ 1:53j_]c_,_

USING FUNCTIONS OF REMOTE CONTROL 1

o This remote control can control up to 8 different components.

/!	o Before operating audio and video components other than this receiver with using this remote control, the setup code for each

	component should be entered.
	o For system remote control operation, "000" was stored previously in the memory of the device button "DOCK" for Sherwood iPod
	dock, "CD" for Sherwood CD player, "BD" for Sherwood BD/DVD player and 'q-V"for Sherwood TV respectively as its factory
	setup code. So, you don'tneed to enter its code for each Sherwood component except in such a case that its code does not work.

Entering a setup code

1.Turn on the component you want to operate.

2.Find the setup codes according to the type and the brand name of your component, referring to "Setup Code Table" on page 57.

_. Press and hold down both the ENTER button and the desired one of the DEVICE buttons for more than 1 seconds.

o The LED will flicker once.

mNote :

o The "AVR" button is unavailable for the audio components other than this receiver.

4.Enter a 3 digit code, aiming the remote control at the remote sensor on the component.

Example: When entering "001".

Audio

E:S3E:_ [::Z3 r-q

TUNER	_	.......
	[Z3	[:_3 r-m

o If entering is performed successfully, the LED will flicker twice.

o To be sure that the setup code is correct, press the POWER ON (or STANDBY) button. If your component is turned off, the setup code is correct.

o When your component is not turned off, repeat the above steps 2 to 4, trying each code for your component until you find one that works.

mNotes:

oIf the LED did not flicker twice, then repeat the above steps 3 to 4 and try entering the same code again.

o Manufacturers may use different setup codes for the same product category. For that reason, it is important that you check to see if the code you have entered operates as many controls as possible. If only a few functions operate, check to see if another code will work with more buttons.

5.Repeat the above steps 1 to 4 for each of your components.

R-904N specifications

The Sherwood R-904N is an outstanding receiver that combines vintage aesthetics with modern technologies, making it a beloved choice for audio enthusiasts and casual listeners alike. Known for its reliability and sound quality, the R-904N stands out in the crowded market of audio equipment.

One of the main features of the Sherwood R-904N is its robust power output. Delivering a solid 100 watts per channel at 8 ohms, it ensures that your audio sources are amplified effectively, be it a quiet piano piece or a robust rock anthem. The high-performance amplifier design not only provides ample power but also maintains clarity and minimal distortion even at high volumes, allowing listeners to enjoy music in its purest form.

The receiver is equipped with a high-quality FM/AM tuner that provides excellent reception and sound quality. The built-in digital signal processor enhances radio performance, ensuring that you receive crystal-clear audio without unwanted interference. Additionally, the R-904N features a sleek, easy-to-read LCD display that shows station information, making tuning into your favorite channels simple and enjoyable.

Connectivity is another area where the Sherwood R-904N excels. It comes with multiple input options, including analog RCA inputs, coaxial, and optical digital inputs, accommodating a wide variety of audio sources such as CD players, turntables, and streaming devices. This versatility makes it a suitable choice for those looking to build a comprehensive sound system without compromising on quality.

Another notable characteristic of the R-904N is its user-friendly interface. The front panel is well-organized, featuring easily accessible knobs and buttons to control volume, source selection, and tone adjustments. Moreover, it provides remote control functionality, allowing users to navigate through their audio choices comfortably from a distance.

The Sherwood R-904N also incorporates advanced sound processing technologies, including Dolby Audio support, enhancing the listening experience for movies and music alike. Its built-in EQ allows users to tailor the sound profile to match their personal preferences, accommodating different genres of music or varying listener tastes.

In summary, the Sherwood R-904N is a remarkable receiver that merges classic design elements with modern functionality. With its powerful output, versatile connectivity options, and user-friendly features, it stands as an exemplary choice for anyone serious about audio quality and performance. Whether used for casual listening or immersive home theater setups, the R-904N continues to impress and deliver exceptional audio experiences.