Sherwood R-904N manual IR-.904NAENG091007R200-.904NA. -10-14- 153jc

Page 51

•IR-.904N(A)_ENG_091007:R200-.904N(A). -10-14-_ 1:53j_]c_,_

When selecting the SPEAKER CONFIGURATION

1, Press the CURSOR UP/DOWN buttons to select the "SPK CFG", then press the ENTER button.

o Then "F ~" will be displayed.

2, Press the CURSOR UP/DOWN buttons to select the desired speaker.

3, Press the CURSOR LEFT/RIGHT buttons to set the selected speaker as desired.

o Depending on your speaker type, you can select one of these following speaker types. o Front, Center, Surround and Surround Back speakers :

LARGE (or L) : Select this when connecting speakers that can fully reproduce sounds below crossover frequency.

SMALL (or S) : Select this when connecting speakers that can not fully reproduce sounds below crossover frequency. When this is selected, sounds below crossover frequency are sent to the subwoofer or speakers which are set to "LARGE" (when not using a subwoofer).

NO : Select this when no speakers are connected. When this is selected, sounds are sent to the speakers which are not set to "NO".

( ) : Selectable for Surround Back speakers.

*Surround Back speakers :

x2/xl : Select the desired depending on the number of speakers connected to SURROUND BACK!ROOM2 terminals. o SubWoofer :

YES : Select this to output LFE signals and bass frequencies of channels set to "SMALL" from the subwoofer.

PLUS : Select this if you want the subwoofer to output bass sound continuously or you want deeper bass (the bass frequencies that would normally come out the front and center speakers are also routed to the subwoofer.)

NO : Select this when the subwoofer is not connected. The bass frequencies are output from other speakers.

[] Notes :

oWhen speakers are set to "SMALU', you should set their crossover frequency correctly according to their frequency characteristics. (For details, refer to "When selecting the CROSSOVER FREQUENCY" on page 52.)

oWhen the "F" (Front) is set to "SMALL, "C" (Center), "S" (Surround) and "SB" (Surround Back) cannot be set to "LARGE" and the "SW" (SubWoofer) cannot be set to "NO".

oWhen the "S" (Surround) is set to "SMALU', the "SB" (Surround Back) cannot be set to "U' (Large).

4, Repeat the above steps 2 and 3 until the speakers are all set to the desired mode.

[]About the speaker size

o Select "LARGE" or "SMALU' not according to the actual size of the speaker but according to the speaker's capacity for playing low frequency (bass sound below frequency set on the "CROSSOVER FREQUENCY" menu) signals.

o If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Operating iNSTRUCTIONS SherwoodImportant Safety Instructions Read this Before Operating Your Unit Do not Expose THiS Appliance to RAiN or MoistureCanada CONTENTSi Connecting Audio Component Connecting AntennasConnecting Video Components ComponentVideo Connecting Subwoofer PRE OUT Connecting Digital INSConnecting Speakers BACK/ROOM2 Speaker placementConnecting ROOM2 Speakers ROOM2Modem Connecting for System ControlConnecting to Network 10, AC Input CordFluorescent Display IR-.904NAENG0.CJL007R200-.904NA-10-14 153jcMicrophone Setup IviicjackUSB Connector Front AUX JackPower on button Standby button Stereo button Sound Parameter button Sleep buttonUP/DOWNA/V buttons ROOM2 Input Selector buttons Mute button 14 O CZZC2Z3 13 OE70E3OPERATINGCOMPONENTSWITHREMOTECONTROL1 Repeat the above steps 1 to 4 for each of your components IR-.904NAENG09L007R200-.904NA. -10-14- 153jcAssign Audio RPT Using a punch=through functionOperating a macro function Programming a macro functionBefore operation = In the standby mode, turn the power onSwitch the speakers on IR-.904NAENG09100TR200-.904NA. -10-14- 153jcSelect the digital or analog input connected as desired Listening with headphonesAdjust the overall volume Muting the soundDolby Pro Logic IR-.904NAENGOglOOTR200-.904NA. -10-14- 153jcSurround modes Dolby Pro Logic IIx surroundDolbyprologicii MOVIE/MUSIC/GAME DTS-HDHIGHRESOLUTIONAUDIO/MASTERAUDIODTSESDISCRETE/MATRIX Dolbydigitalplus / Dolbytruehd DolbydigitalexEZ3 E23 When adjusting the sound parametersIR-.904NAENG09L00TR200-.904NA. -10-14- 153jc Enjoying Surround SoundWidth DLY IR-.904NAENG09100?R200-.904NA. -10-14- 153jcIR-.904NAENG09100?R200-.904NA. -10-14- 153jc IR-.904NAENG091007R200-.904NA. -10-14- 153jc Adjust the level of the selected channel as desired Repeat the above steps 1 and 2 to adjust each channel levelCH.LEVEL == = , = Listening to Radio Broadcasts j Auto tuningManual tuning Auto presettingRm...... rm Presetting radio stationsTuning to preset stations IR-.904NAENG091007R200-.904NA. -10-14- 153jc%About VuNow Pod Internet Videos Remote Controls for VuNow PodCzJ Page 09Z007R-904A 2009-Z0-Z4 J1o/€ Z53 To view the contents of a Usei storage device IR-,CJ04KAENG0,CJl007R200,9-,CJ04KA-10-14GHome Network Select the Remove from My Channels BookmarksMy Channels To play a channel listed in the My ChannelsRecently Played LiTo play a recently played video LiTo clear a video in the Recently Played listSelect Clear Recently Played SelectYouTube from home Select Login in YouTube section LoginSelectMovies from home Select achannel MoviesInto create your CinemaNow Account Select Movies from homeTo buy or rent videos directly using VuNow Pod Network Wired Network connection Select Settings from homeEnter the WEP key for the wireless network Press OK key Advanced Wired ModeAdvanced Wireless Mode Upgrading the VuNow Pod from the Vunow ServerDNS Displaying the operation status Operating Sleep timerAdjusting the brightness of the fluorescent display Other FunctionsSelect the desired input as a ROOM2 source Adjust the ROOM2 volumeROOM2 Source Playback Turn on the ROOM2 functionTurn the setup menu on Select the desired menu using the Cursor UP/DOWN buttonsEE3 EB SWYES//NO Over @ SystemSPK CFG Small IE/SMALL/NOTone /ON MWhen selecting the ToneEtting the Room EQ IR-.904NAENG09100?R200-.904NA. -10-14SBR FT Setting the Speaker SetupIR-.904NAENG091007R200-.904NA. -10-14 SPK CFG Over CH LevelWhen selecting the Speaker Configuration When selecting the Channel Level To cancel the test tone function, press the Return buttonPress the Enter button to confirm your selection MAhout the speaker distance MLT Room Setting the MULTi Room SetupTroubleshooting Guide 87.5~107.9 MHz MTC MGAHIQ SSSTMK CCEHeadquarter Oll 034 Hitachi 004TVuse008034 Lloyds023 MegavoxAUX-MD LXI JBL046Sherwood
Related manuals
Manual 1 pages 4.75 Kb

R-904N specifications

The Sherwood R-904N is an outstanding receiver that combines vintage aesthetics with modern technologies, making it a beloved choice for audio enthusiasts and casual listeners alike. Known for its reliability and sound quality, the R-904N stands out in the crowded market of audio equipment.

One of the main features of the Sherwood R-904N is its robust power output. Delivering a solid 100 watts per channel at 8 ohms, it ensures that your audio sources are amplified effectively, be it a quiet piano piece or a robust rock anthem. The high-performance amplifier design not only provides ample power but also maintains clarity and minimal distortion even at high volumes, allowing listeners to enjoy music in its purest form.

The receiver is equipped with a high-quality FM/AM tuner that provides excellent reception and sound quality. The built-in digital signal processor enhances radio performance, ensuring that you receive crystal-clear audio without unwanted interference. Additionally, the R-904N features a sleek, easy-to-read LCD display that shows station information, making tuning into your favorite channels simple and enjoyable.

Connectivity is another area where the Sherwood R-904N excels. It comes with multiple input options, including analog RCA inputs, coaxial, and optical digital inputs, accommodating a wide variety of audio sources such as CD players, turntables, and streaming devices. This versatility makes it a suitable choice for those looking to build a comprehensive sound system without compromising on quality.

Another notable characteristic of the R-904N is its user-friendly interface. The front panel is well-organized, featuring easily accessible knobs and buttons to control volume, source selection, and tone adjustments. Moreover, it provides remote control functionality, allowing users to navigate through their audio choices comfortably from a distance.

The Sherwood R-904N also incorporates advanced sound processing technologies, including Dolby Audio support, enhancing the listening experience for movies and music alike. Its built-in EQ allows users to tailor the sound profile to match their personal preferences, accommodating different genres of music or varying listener tastes.

In summary, the Sherwood R-904N is a remarkable receiver that merges classic design elements with modern functionality. With its powerful output, versatile connectivity options, and user-friendly features, it stands as an exemplary choice for anyone serious about audio quality and performance. Whether used for casual listening or immersive home theater setups, the R-904N continues to impress and deliver exceptional audio experiences.
Top Page Image Contents