Sherwood R-904N manual IR-.904NAENG09100?R200-.904NA. -10-14, Etting the Room EQ

Page 49

•IR-.904N(A)_ENG_09100?:R200-.904N(A). -10-14-_ 1:53_'7,_

ETTING THE ROOM EQ

1

*Room EQ lets you avoid troublesome listening-based speaker setup and achieve good surround sound. Room EQ has the feature that provides the optimum listening environment at the listening position in your room. You should connect the

 

supplied microphone to the SETUP MIC jack so that this receiver can analyze the information form a series of test tones

!/

 

emitted from speakers at listening position and can adjust the size, channel level, distance and frequency response of each

 

speaker automatically.

* If you want to personalize your speaker setup by making the settings manually, perform the "SETTING THE SPEAKER

 

SETUP" on page 50.

*

After the Room EQ setup has been completed, set the Room EQ as desired. (For details, refer to "When selecting the "EQ

(Room EQ)" on page 24.)

mPreparations

_. Check that the speakers are securely connected to this receiver.

°If your subwoofer has adjustable volume and crossover frequency, set the volume halfway and set the crossover frequency to the maximum or the low pass filter off.

_. Connect the supplied microphone to the SETUP MIC jack on the front panel.(For details, refer to "SETUP MIC JACK" on page 12.)

[] Notes :

*Because the microphone for Room EQ setup is designed for use with this receiver, to use the Room EQ setup function, do not use a microphone other than the one supplied with this receiver.

*After you have completed the Room EQ setup procedure, disconnect the microphone.

1, Place the microphone on a flat level surface at the listening position.

*If possible, use a tripod, etc. to attach the microphone at the same height as your ears would be when you are seated in your listening position.

*Ensure there are no obstacles between the speakers and the microphone.

2, Press the ENTER button to check the speaker configuration when "SET RMEQ" is displayed.

,"SET RMEQ" flickers while the receiver outputs the test tones to determine the speakers present in your setup and then "CHECK OK" is displayed.

•Notes :

,Try to be as quiet as possible while outputting the test tones.

*For correct speaker settings, do not adjust the volume while outputting the test tones.

*If there is too much ambient noise, error message will be displayed.

In such a case, press the ENTER button to confirm "RETRY?" after checking for ambient noise.

*If there may be a problem with speaker connection, "ERR ~" (error message) will be displayed.

If confirming "RETRY?" with pressing the ENTER button does not fix the problem, turn off the power and check the speaker connection.

3, To check the speaker configuration, press the CURSOR UP/DOWN buttons to select the speaker.

,Each time the CURSOR UP/DOWN buttons are pressed, the speaker is changed.

*If the speaker configuration is not correct, press the CURSOR LEFT/RIGHT buttons to change the setting. When the correction is finished, confirm the speaker configuration.

4, To confirm the speaker configuration, press the CURSOR UP/DOWN buttons to select "CHECK OK", then

press the ENTER button.

°Then the Room EQ setup will start.

°If any operation is not performed while displaying "CHECK OK" for 10 seconds, the Room EQ setup will start automatically.

5, If the Room EQ setup has been completed, it will be returned to the Room EQ setup.

,Then the settings made in the Room EQ setup are memorized. You can check these settings on the "SPEAKER SETUP" menu. (For details, refer to "SETTING THE SPEAKER SETUP" on page 50.)

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Operating iNSTRUCTIONS SherwoodImportant Safety Instructions Do not Expose THiS Appliance to RAiN or Moisture Read this Before Operating Your UnitCanada CONTENTSi Connecting Audio Component Connecting AntennasComponent Connecting Video ComponentsVideo Connecting Subwoofer PRE OUT Connecting Digital INSConnecting Speakers Connecting ROOM2 Speakers Speaker placementROOM2 BACK/ROOM2Connecting to Network Connecting for System Control10, AC Input Cord ModemFluorescent Display IR-.904NAENG0.CJL007R200-.904NA-10-14 153jcUSB Connector Setup IviicjackFront AUX Jack MicrophoneStereo button Sound Parameter button Sleep button Power on button Standby buttonUP/DOWNA/V buttons ROOM2 Input Selector buttons Mute button C2Z3 CZZ13 OE70E3 14 OOPERATINGCOMPONENTSWITHREMOTECONTROL1 Repeat the above steps 1 to 4 for each of your components IR-.904NAENG09L007R200-.904NA. -10-14- 153jcAssign Audio RPT Using a punch=through functionOperating a macro function Programming a macro functionSwitch the speakers on = In the standby mode, turn the power onIR-.904NAENG09100TR200-.904NA. -10-14- 153jc Before operationAdjust the overall volume Listening with headphonesMuting the sound Select the digital or analog input connected as desiredSurround modes IR-.904NAENGOglOOTR200-.904NA. -10-14- 153jcDolby Pro Logic IIx surround Dolby Pro LogicDTSESDISCRETE/MATRIX DTS-HDHIGHRESOLUTIONAUDIO/MASTERAUDIODolbydigitalplus / Dolbytruehd Dolbydigitalex Dolbyprologicii MOVIE/MUSIC/GAMEIR-.904NAENG09L00TR200-.904NA. -10-14- 153jc When adjusting the sound parametersEnjoying Surround Sound EZ3 E23Width DLY IR-.904NAENG09100?R200-.904NA. -10-14- 153jcIR-.904NAENG09100?R200-.904NA. -10-14- 153jc IR-.904NAENG091007R200-.904NA. -10-14- 153jc Repeat the above steps 1 and 2 to adjust each channel level Adjust the level of the selected channel as desiredCH.LEVEL Manual tuning Listening to Radio Broadcasts j Auto tuningAuto presetting == = , =Tuning to preset stations Presetting radio stationsIR-.904NAENG091007R200-.904NA. -10-14- 153jc% Rm...... rmAbout VuNow Pod Internet Videos Remote Controls for VuNow PodCzJ Page 09Z007R-904A 2009-Z0-Z4 J1o/€ Z53 IR-,CJ04KAENG0,CJl007R200,9-,CJ04KA-10-14G To view the contents of a Usei storage deviceHome Network My Channels BookmarksTo play a channel listed in the My Channels Select the Remove from My ChannelsLiTo clear a video in the Recently Played list Recently Played LiTo play a recently played videoSelect Clear Recently Played SelectYouTube from home Select Login in YouTube section LoginSelectMovies from home Select achannel MoviesInto create your CinemaNow Account Select Movies from homeTo buy or rent videos directly using VuNow Pod Enter the WEP key for the wireless network Press OK key Wired Network connection Select Settings from homeAdvanced Wired Mode NetworkUpgrading the VuNow Pod from the Vunow Server Advanced Wireless ModeDNS Adjusting the brightness of the fluorescent display Operating Sleep timerOther Functions Displaying the operation statusROOM2 Source Playback Adjust the ROOM2 volumeTurn on the ROOM2 function Select the desired input as a ROOM2 sourceSelect the desired menu using the Cursor UP/DOWN buttons Turn the setup menu onEE3 EB SPK CFG Small @ SystemIE/SMALL/NO SWYES//NO OverTone /ON MWhen selecting the ToneEtting the Room EQ IR-.904NAENG09100?R200-.904NA. -10-14IR-.904NAENG091007R200-.904NA. -10-14 Setting the Speaker SetupSPK CFG Over CH Level SBR FTWhen selecting the Speaker Configuration To cancel the test tone function, press the Return button When selecting the Channel LevelPress the Enter button to confirm your selection MAhout the speaker distance MLT Room Setting the MULTi Room SetupTroubleshooting Guide 87.5~107.9 MHz MTC MGATMK SSSCCE HIQHeadquarter Oll 023 Hitachi 004TVuse008034 LloydsMegavox 034AUX-MD LXI JBL046Sherwood
Related manuals
Manual 1 pages 4.75 Kb

R-904N specifications

The Sherwood R-904N is an outstanding receiver that combines vintage aesthetics with modern technologies, making it a beloved choice for audio enthusiasts and casual listeners alike. Known for its reliability and sound quality, the R-904N stands out in the crowded market of audio equipment.

One of the main features of the Sherwood R-904N is its robust power output. Delivering a solid 100 watts per channel at 8 ohms, it ensures that your audio sources are amplified effectively, be it a quiet piano piece or a robust rock anthem. The high-performance amplifier design not only provides ample power but also maintains clarity and minimal distortion even at high volumes, allowing listeners to enjoy music in its purest form.

The receiver is equipped with a high-quality FM/AM tuner that provides excellent reception and sound quality. The built-in digital signal processor enhances radio performance, ensuring that you receive crystal-clear audio without unwanted interference. Additionally, the R-904N features a sleek, easy-to-read LCD display that shows station information, making tuning into your favorite channels simple and enjoyable.

Connectivity is another area where the Sherwood R-904N excels. It comes with multiple input options, including analog RCA inputs, coaxial, and optical digital inputs, accommodating a wide variety of audio sources such as CD players, turntables, and streaming devices. This versatility makes it a suitable choice for those looking to build a comprehensive sound system without compromising on quality.

Another notable characteristic of the R-904N is its user-friendly interface. The front panel is well-organized, featuring easily accessible knobs and buttons to control volume, source selection, and tone adjustments. Moreover, it provides remote control functionality, allowing users to navigate through their audio choices comfortably from a distance.

The Sherwood R-904N also incorporates advanced sound processing technologies, including Dolby Audio support, enhancing the listening experience for movies and music alike. Its built-in EQ allows users to tailor the sound profile to match their personal preferences, accommodating different genres of music or varying listener tastes.

In summary, the Sherwood R-904N is a remarkable receiver that merges classic design elements with modern functionality. With its powerful output, versatile connectivity options, and user-friendly features, it stands as an exemplary choice for anyone serious about audio quality and performance. Whether used for casual listening or immersive home theater setups, the R-904N continues to impress and deliver exceptional audio experiences.
Top Page Image Contents