TV/VCR SECTION
TV OPERATION AND SETTINGS
SECTION
WATCHING A TV PROGRAM
1 After antenna or cable connection is TV/VCR completed, connect the power cord into
a standard AC outlet.
2Press [POWER] to turn on the unit.
3Use [CH. K / L] or the Number buttons to select your desired channel number.
To use the number buttons
•Single digit channels: (Ex. 02, 03, 04 and so on) Press [0] first to select a single digit channel.
•Two digit channels: (Ex. 12, 38, 95 ...) Press two digits directly.
SLEEP TIMER / PICTURE CONTROL
You can set Sleep Timer and picture | TV/VCR |
| |
adjustment with [PICTURE / SLEEP]. |
|
•The menu changes as described below every time you press [PICTURE / SLEEP].
Sleep Timer | BRIGHT | CONTRAST |
SHARPNESSTINTCOLOR
SLEEP TIMER SETTING
The Sleep Timer function is used to turn off the
unit without pressing [POWER] after a desired time.
AND SETTINGS TV/VCR
•Three digit channels: (Ex. 115, 125 ...)
Press [+100] first, then press the last two digits.
1Press [PICTURE / SLEEP] to
display the Sleep Timer menu.
SLEEP 0 MINUTE
OPERATION
4Use [VOL. X / Y] to adjust the volume.
Press [MUTE] to instantly
mute the sound. Press it again VOLUME 20
2 Within 5 seconds, set your desired sleep time |
using [s / B]. |
• [B]...Increase by 30 min. (Up to 120 min.) |
• [s]...Decrease by 30 min. |
TV
to restore the previous sound level.
C C C C C C C C C C C C C C C C
NOTE:
• To cancel the Sleep Timer, use [CLEAR] or [s / B]
/
NOTE: | to set the time to "0". | |
• Even if you turn off the unit in the DVD mode, the unit |
| |
3 To confirm the remainder time to shutdown, | ||
will be in the TV/VCR mode when you turn it on again. | ||
| press [PICTURE / SLEEP]. |
FUNCTIONS
TO WATCH CABLE OR SATELLITE CHANNEL
If the unit is connected to a cable box or satellite box, use [CH. K / L] to select CH3 or CH4 accord- ing to the output channel setting of the device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
When an external equipment is connected to the front AUDIO/ VIDEO input jacks, press
[SELECT] or [CH. K / L] repeat-
PICTURE CONTROL
1Press [PICTURE / SLEEP]
BRIGHT
repeatedly until desired control – P P P P P P P C P P P P P P P + is displayed.
2Use [s / B] to adjust to your desired level within 5 seconds.
BRIGHT | to decrease brightness to increase brightness |
OPERATING CONTROLS AND
edly until "AUX" appears on the screen.
NOTE:
AUX
CONTRAST | to decrease contrast | to increase contrast |
COLOR | to pale | to brilliant |
TINT | to purple | to green |
SHARPNESS | to soft | to clear |
•If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically.
•Even if any power failure occurs, the unit will retain its memory for this feature.
9
EN