B DISPLAY Setting
You can change the display functions. Follow steps 1 to in the “CUSTOM Menu” section on page 20.
4Select the desired item.
or
DISPLAY menu
TV ASPECT: |
|
|
| (Default: 4:3 LETTER BOX) |
| ||||||
QUICK |
| ||||||||||
See Hint on the left. |
|
| Select the |
| |||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| desired | ENTER |
TV ASPECT | 4:3 LETTER BOX |
|
|
|
| TV ASPECT |
| setting. |
| ||
|
|
| 4:3 LETTER BOX |
|
| ||||||
STILL MODE | AUTO |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 4:3 PAN & SCAN |
|
|
| ||
PROGRESSIVE | OFF |
| ENTER |
|
|
|
| ||||
|
| 16:9 WIDE |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
| or |
|
|
|
|
|
|
|
|
|
|
|
|
|
6To exit
the TV ASPECT or STILL MODE screen
SETUP
To complete the
|
| STILL MODE: (Default: AUTO) | Select the |
| ||||
DISPLAY |
| See Hint on the right. |
|
| ||||
TV ASPECT | 4:3 LETTER BOX |
|
|
| STILL MODE | desired |
| |
TV ASPECT | 4:3 LETTER BOX | setting. | ENTER | |||||
STILL MODE | AUTO | AUTO | ||||||
PROGRESSIVE | OFF | STILL MODE | AUTO |
|
|
| ||
| FIELD |
|
| |||||
|
| PROGRESSIVE | OFF |
|
|
| ||
ENTER |
| ENTER | FRAME |
|
| |||
|
|
| or |
| ||||
|
|
|
|
|
|
| ||
PROGRESSIVE setting
ENTER
Hint
TV ASPECT:
• Select “4: LETTER BOX”, so that |
black bars may appear on the top |
and bottom of the screen. |
• Select “4: PAN & SCAN” for a |
PROGRESSIVE: QUICK (Default: OFF)
See Hint on the left.
TV ASPECT | 4:3 LETTER BOX |
| 4:3 LETTER BOX |
STILL MODE | AUTO |
| AUTO |
PROGRESSIVE | OFF |
| ON |
SETUP
STILL MODE:
• Select “AUTO” usually. |
• If you select “AUTO”, |
automatically select the |
best resolution setting |
(FRAME or FIELD) based |
full height picture with both sides |
adjusted. |
• Select “16:9 WIDE” if a wide screen |
TV is connected to this unit. |
PROGRESSIVE:
•You can set “PROGRESSIVE” to “OFF” in the DISPLAY menu or press and hold [PLAY B] on the front of the unit for more than 5 seconds during playback, so that the PROGRESSIVE SCAN indicator on the front panel lights off.
•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and
ENTER
If there is no picture or you do not press any buttons for 15 seconds, Progressive scan will switch to “OFF” and it will exit the setup menu.
Before proceeding…
1.Make sure your TV has progressive scan.
2.Connect with component video cable
NOTE: If there is no picture or picture is distorted after selecting ‘YES’,
wait about 15 seconds for auto recovery.
Activate Progressive? | NO | |
|
| YES |
SELECT: K / L | SET:ENTER |
|
Confirm again to use progressive scan. If Picture is good, select ‘YES’.
NO
YES
SELECT: K / L SET:ENTER
Select “Yes”.
or
ENTER
Select “Yes”.
or
on the data characteristics |
of the pictures. (default). |
• If you select “FIELD”, the |
picture in the still mode will |
be stabilized. |
• If you select “FRAME”, the |
picture in the still mode will |
be highly defined. |
• An individual picture on TV |
screen is called a “frame”, |
which consists of two |
separate images called a |
“field”. |
• Some pictures may be |
blurred if you select |
“AUTO” in the still mode due |
to their data characteristics. |
Functions
C AUDIO Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to in the “CUSTOM Menu” section on page 20.
4 Select the desired item. | DRC (Dynamic Range Control): (Default: ON) | 6To exit the menu | ||||||
| SETUP | |||||||
| Set to “ON” to compress the range between soft and loud sounds. | |||||||
|
| |||||||
|
|
|
|
|
|
|
|
|
or | DRC | ON |
|
|
| OFF |
| |
| DOWN SAMPLING | ON |
|
|
| ON |
| |
| DOLBY DIGITAL | BITSTREAM | ENTER BITSTREAM |
| ||||
DVD
AUDIO menu
|
| DOWN SAMPLING: (Default: ON) | |||
|
| Set to “ON” when outputting in 48kHz. | |||
AUDIO |
| Set to “OFF” when outputting the original sound. | |||
DRC | ON |
|
|
|
|
DOWN SAMPLING | ON | DRC | ON |
| ON |
DOLBY DIGITAL | BITSTREAM |
| |||
ENTER |
| DOWN SAMPLING | ON |
| OFF |
|
| DOLBY DIGITAL | BITSTREAM | ENTER | BITSTREAM |
|
| DOLBY DIGITAL: | QUICK | (Default: BITSTREAM) | |
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.
•BITSTREAM: Outputs a Dolby Digital Signals.
•PCM: Convert the Dolby Digital into PCM (2 channel).
DRC | ON |
| ON |
DOWN SAMPLING | ON |
| ON |
DOLBY DIGITAL | BITSTREAM |
| PCM |
|
ENTER
DRC:
•This function is available only on the discs which are recorded in the Dolby Digital format.
DOWN SAMPLING:
•When playing disc with copyright protection, the sound will be down sampled at 48kHz, even if you set to “OFF”.
•This function is available only on digital outputting of a disc recorded in 96kHz.
– 21 – | EN |