JVC SR-DVM70EU manual Recording Mode

32 EN BASIC OPERATIONS ON DVD DECK

Basic Recording				7 Press o twice to stop recording.
				● It takes about 10 seconds to end the writing session when you
				stop recording.
				NOTES:
				● It is recommended to format a DVD-RAM disc before use if you
				use the disc on this unit for the first time.
● Turn on the unit.				● When using a brand-new DVD-RW disc, format the disc either in
				VR mode or in Video mode. (A pg. 78)
● Turn on the TV and select the AV mode.
				● Recordings made on DVD-R/RW disc must be finalised to play
● Slide the TV/CABLE/SAT/DVD switch to DVD.
				back on other DVD players. Perform		AFinalise A Disc (DVD Deck
				Only)B (A pg. 79).
ATTENTION:				● You can record up to 99 programmes and 99 play lists on each
				disc.
It is not possible to record programmes on a DVD-R disc which
				● Some programmes can only be recorded one time.
has already been finalised.
				● When recording is started, an index of the first part of recording is
				automatically recorded. (A pg. 49) To record satellite
	DV/HDD/DVD		REC MODE	programmes, refer to page 48. To delete the index, refer to
				page 51.
				● Recording sometimes may stop or cannot be performed even if
				there is enough available capacity remaining on the disc.
				● It is not possible to record on both DVD and HDD simultaneously.
				Recording Mode
INPUT SELECT JK	o	I	WR	MPEG2 format is used as recording format. As a guide for picture
				quality, the AbpsB unit is used to represent how much data can be
	CABLE/SAT			recorded per second. The larger this value is, the better the picture
				quality becomes but more capacity is required for the recording.
	TV	DVD
				Select XP or SP for programmes where quick movement occurs,
	DVD			such as sports programmes, and LP or EP for talk shows, etc. with
				relatively less movement.
0-9				The recording modes for a 4.7 GB disc are set as follows:
	PR+/-			Recording	Recording amount	Maximum recording
				mode	(approx.)	time (approx.)
				XP	10 Mbps	1 hour
ENTER				SP	5 Mbps	2 hours
				LP	2.5 Mbps	4 hours
I				EP	1.6 Mbps	6 hours
				FR60-FR360	The amount varies	1 – 6 hours
R
	W			(A pg. 34)	depending on the
o				FR420	selected time.	7 hours
REC MODE
				FR480		8 hours
				● For details on FR mode, refer to AFree Rate FunctionB (A pg. 34)

1Load a recordable disc.

●For details, refer to APlacing A DiscB (A pg. 8).

2Press DV/HDD/DVD on the unit repeatedly or DVD on the remote so that the DVD lamp lights up on the unit.

3Press PR +/– or the number keys wish to record. You can also press unit to select.

to select the channel you INPUT SELECT JK on the

4Press REC MODE repeatedly to select the recording mode, then press ENTER.

●Each time you press REC MODE, the recording mode changes as follows:

XP N SP N LP NEP N FR60-FR360* N FR420, FR480 N (Back to the beginning)

*The value is selectable from 1 to 6 hours in 5-minutes interval by pressing DErepeatedly after selecting AFR60–FR360B. To change the value in 30-minutes interval, press and hold DE.

●For details on the recording mode, see the right column.

5Press R on the unit to start recording. Or while holding R, press I on the remote control.

●The DVD recording lamp lights up on the unit.

6Press R and W on the remote control simultaneously to pause recording.

●To resume recording, press R and I simultaneously.