Hitachi DV-RX7000E instruction manual MP3 CD-R/RW

Page 4

Audio CD

An audio disc on which 44.1 kHz PCM Audio is recorded.

Plays CD-DA format audio CD-R and CD-RW discs. The unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording.

CD-R/RW

MP3 CD-R/RW

Only CD-R discs with MP3 files recorded with ISO9660 or JOLIET format can be played back.

Only MP3 files with the ".mp3", ".MP3" extension can be used.

For MP3 files recorded with a VBR (Variable Bit Rates), from 32 kbps to 320 kbps, the sound may cut in out.

Playable bitrate range is from 56 kbps to 320 kbps.

The unit can handle a maximum of 1000 files and folders.

JPEG CD-R/RW

Only JPEG files with the ".jpg", ".JPG" extension can be used.

The unit can handle a maximum of 1000 files and folders.

Maximum size of progressive JPEG is 3M pixels.

MOTION JPEG is not supported.

Using CD-R/RW

If the CD-R/RW disc was not recorded as a closed session, you may experience a delay in the early playback time, and all recorded files may not play.

Some CD-R/RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/RW media from CDs for your personal use, playability may vary depending on contents and discs.

DVD-R Disc Playback and Recording

Once a DVD-R recorded in Video Mode is finalized, it becomes DVD-Video.

You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programs and erasing programs before finalizing.

When programming is erased from a DVD-R, that space does not become available. Once an area on a DVD-R is recorded on, that area is no longer a vailable for recording, whether the recording is erased or not.

It takes about 30 seconds for the unit to complete recording management information after recording finishes.

This product optimizes the DVD-R for each recording. Optimizing is carried out when you start recording after inserting the disc or turning on the unit.

Recording onto the disc may become impossible if optimizing is carried out too many times.

Playback may be impossible in some cases due to the condition of recording.

This unit can play back DVD-R discs recorded and finalized with a Hitachi DVD recorder. It may not be able to play some DVD-R discs depending on the disc and the condition of the recording.

DVD-RW Disc Playback and Recording

Recording and playback can be performed on a DVD- RW discs in both the Video and VR Modes.

Once a DVD-RW recorded in VR Mode or Video mode is finalized, you cannot perform additional recording.

Once a DVD-RW recorded in Video Mode is finalized, it becomes DVD-Video.

In both modes, playback can be performed before and after finalization, but additional recording, deleting and editing cannot be performed after finalization.

If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format.

Be careful when executing Format because all the recorded data may be lost.

A DVD-RW blank disc is initialized to VR Mode when first initialized.

DVD-RW (VR mode)

-This is a format that is used for recording data on a DVD-RAM or DVD-RW disc. You can repeat recording, editing, deleting, partial deletion, creation of playlist, and etc.

-A disc that is recorded in this mode may not be played by an existing DVD player.

DVD-RW (Video mode)

-This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by an existing DVD player once it has been finalized.

-If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been finalized, it cannot be played or additionally be recorded by this recorder.

DVD-RAM Disc Playback and Recording

DVD-RAM discs come with or without a cartridge. For this product, we recommend DVD-RAM discs that come with cartridges.

Some cartridges are able to eject the disc inside. Even if you are able to eject the disc, always use the disc with the cartridge to ensure correct operation.

DVD-RAM discs have a Write Protect tab in order to avoid accidental erasure of recorded data.

With the Write Protect tab set to PROTECT, you can play the disc, but recording or erasing will not work.

Set the Write Protect tab to UNPROTECT to format the disc or erase data.

Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the recording.

You cannot play a DVD-RAM in most DVD players due to compatibility issues.

Only DVD-RAM standard Version 2.0 discs can be played in this unit.

DVD-RAM recorded on this unit may not work with other DVD players. To determine compatibility with these DVD- RAM discs, refer to the user’s manual for the player.

4 - English

Image 4
Contents DVD Recorder ExamplePrecaution Important Safety InstructionsMaintenance of Cabinet Disc SpecificationsHandling Cautions Disc HandlingMP3 CD-R/RW Copy Protection Contents Additional Information General Features Before Reading RecorderUsing a DVD-RAM Using a DVD-RWUsing a DVD-R Creating a playlist DVD-RAM/-RW in VR modeFront Panel DescriptionFront Panel Display Tour of the Remote Control Rear Panel? REC Mode Button Cancel Button Repeat A-B ButtonOK/DIRECTION Buttons UP/DOWN or LEFT/RIGHT Buttons Return ButtonConnecting the Power Cord Preparing the Remote Control Quick OverviewConnecting Scart Cable AccessoryUnpacking Method 1 Antenna + DVD RecorderMethod 3 Antenna + DVD Recorder + external decoder box + TV Method 1 Connecting to a Composite Video output jack Method 2 Connecting to an S-video output jackMethod 1 Connecting to your TV Other type of connect- ing the Audio output cableConnecting to AV3, AV4, DV input jack Method 2 Connecting a Camcorder to the AV 4 Input jacks Method 3 Connecting a Camcorder to the DV in jackYou can also use the AV4 in jacks on the front Panel of the DVD RecorderPreparing the Remote Control Setting the Remote ControlUsed to switch the television on If several codes are indicated for your televisionButton Function OffOn-Screen Menu Navigation Menu ButtonUp/Down and Left/Right OK ButtonConnect the coaxial cable as indicated on Plug & Auto Set upAuto Channel scan will be started Check the date and time Clock SetSelect System the 34 buttons, then press the 1 or OK button Auto Clock Auto SetupSee page 15 Connections Refer to following table when selecting your country Manual SetupPress the 342 1 buttons to select your Country CM Skip Time Setting Select Edit, Delete, or SwapSetting Up Nicam Options Select Setup using 34 buttons, then press the 1 or OK buttonSetting Up Options Language FeaturesYou cant use the Setup functions during disc playback Language setup menu will be displayedButton Setting Up the Audio OptionsDisc Menu Language For the disc menu contained on the disc This function allows you to setup the TV screen settings Digital OutputDynamic Compression Output from Analog Audio OutputSetting Up the Parental Control Display Video OptionsTV Aspect 3D Noise Reduction motion adaptive noise reductionAbout the Change Password ‘Confirm the password.’ message will be displayedRecordable discs Before RecordingThis recorder can record on the following discs Recording Mode Concerning Copy Control SignalsRecording Formats Unrecordable picturesChecking the available disc space Disc Information About INFO. KeyPress the OPEN/CLOSE button to close the disc tray Press the Prog / or number Program you want to recordPress the REC button To pause recordingFront panel display changes in the following sequence Source while recordingPress the Time Slip button during DVD- RAM recording Press the Stop button to clear the time slip functionTV Program 1 to Press the REC button to adjust the recording timeOTR appears on the front panel display Making a Standard Timer Mode Recording ModeEditing a Standard Timer Press the OK buttonDeleting a Standard Timer Press the OK button to confirm the edited settingUsing the Showview Feature Selected entry will be deleted from the listPress the Menu button Showview ExtendedWith the DVD in Stop press the Menu button Timer Recording Messages When the start time in the StandardTimer list arrives, if the set is in power DisplayedTo stop Recording StopBefore Playing Region code DVD-Video onlyDisc types that can be played Discs that cannot be playedPress the OPEN/CLOSE button Playing a DiscPress the Stop button to stop playback Using the Disc & Title Menu Using the Search FunctionsSearching through a Chapter or Track Press the Title List button to move to the Title ListSearching Chapters or Tracks Slow Motion PlayStep Motion Play About AnykeyUsing the Repeat Function Playing Repeatedly Repeat PlaybackPress the 34 buttons to select the Time Press the Repeat buttonPress the Anykey button Press the Repeat button repeatedly to select OffPress the Repeat A-B button Press the OK button again to set end point BPress the Anykey button. Repeat is highlighted Repeat playback of the A-B section startsSelecting the Subtitle Press the Subtitle button during playbackSelecting the Audio language Changing the Camera AnglePress the Audio button during playback Are disc-specificPress the Anykey button during playback or pause Zooming-InNormal size 2X 4X 2X B a==============--b Using PIP Picture in Picture Press the PIP buttonPress the PIP button again Press the PIP button repeatedly to select OffUsing Bookmarks Press the OK button when the desired scene appearsPress the Marker button during playback Number 1 is displayed and the scene is memorizedUsing Markers Press the Cancel button to delete the selected bookmarkClearing a Bookmark Press the Marker buttonPlaying Back a Marker Clearing a MarkerButtons on the Remote Control Playing an AudioPlaying an Audio CD CD-DA Audio CD CD-DA Screen ElementsMP3 Screen Elements Playing a MP3 DiscInsert a MP3 Disc into the disc tray Select Play Option using the 2 1 buttons Play Option Mode To Program TracksSelect Playlist using the 34 buttons OK or 1 button Playing a Picture CDCase of playing a Picture CD, see number 3 on Next Press the 342 1 buttons to select a picture Playing the Title ListPress the Title List button Play, Rename, Delete, Edit, Protection See pages 71~74 To stop title play, press the Stop buttonEdit menu is displayed on the right Title List Screen Elements MovieEditing Using the Menu button Basic EditingTitle List Renaming Labeling a TitleLocking Protecting a Title Deleting a TitleDeleting a Section of a Title Press the OK button at the end point Press the Menu button after the operation has finishedSelected section has been deleted Title List screen will disappearCreating a Playlist Advanced Editing Play ListPress the OK button at the start point Playing Entries in the Playlist Press the Play List buttonPress the Stop button to stop playing Playlist entries will be playedRenaming a Playlist Entry Enter the desired characters using 342 1 buttonsPress the 34 buttons to select Playlist, and then Playing a Selected Scene Editing a Scene for the PlaylistPress the OK button at the start point of the scene Press the OK button at the end point of the sceneModify Scene screen is displayed ButtonsPress the OK button at the starting point of the scene Adding a SceneSelected scene is moved to the selected position Copying a Playlist Entry to the Playlist Deleting a ScenePlaylist that has been selected at last will be copied Deleting a Playlist Entry from the Playlist NumbersEnter the desired characters using the arrow buttons Disc ManagerEditing the Disc Name Press the Menu button with the disc stoppedDisc Protection Formatting a DiscTection has been cleared DVD-RAM onlyDelete All Title Lists Possible Editing Partial editing is Not availableAll title lists are deleted Cartridge Protect InfoIs set to Not Protected Disc is finalized Finalizing a discFrom the record list Unfinalizing a disc V/VR mode Same asOperation DVD-VideoAdditional Information Troubleshooting Timer Timer lamp flickers Timer recording does not workRemote control Remote control doesn’t work Other Forget my password for parentalSpecifications Audio OutputHitachi Atago Building