Progressive scan
The progressive scan capability provides the highest resolution pictures with less flicker and line structure.
If you are using the Component video sockets, but are connecting the unit to a standard (analog) television, set PROGRESSIVE to Off.
If you are using the Component video sockets for connection to a TV or monitor that is compatible with a progressive scan signal, set PROGRESSIVE to On.
Note: This unit supports the progressive scan only for NTSC DVDs.
Selecting progressive scan
Preparation:
•Connect to a TV equipped with component sockets.
•Turn ON the TV and set it to the corresponding video input mode.
•Set the VIDEO OUTPUT selector switch on the rear panel to COMPONENT position.
•Press DVD/FM/AM selector to select the DVD mode.
Load an NTSC DVD disc.
1 Press PROGRESSIVE in the stop mode. The current progressive mode appears on the display window for 4 seconds.
Press PROGRESSIVE again to change the progressive mode “ON” or “OFF” during the progressive mode appears on the display win- dow.
•The unit recognizes the picture source (film or video) of the current disc according to the disc information.
2 Press PLAY to start playback.
■To select PROGRESSIVE scan Off
On the step 1 above, select “PRO. OFF”.
Notes:
•JPEG CDs can not be play back with the progressive scan- ning mode.
•Some discs may not be played back with the progressive scan- ning mode correctly because of the disc characteristics or re- cording condition.
•If your TV does not accept the progressive scan format, the picture will appear scrambled if you select progressive scan output from the unit. In such a case, select PROGRESSIVE scan Off.
There are two types of source content in pictures recorded in DVD video discs: film content (pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).
When the unit plays back a film source material, uninterlaced
progressive output signals are created using the origi- nal information. When a video content is played back, the unit interleaves lines between the interlaced lines on each to create the interpolated picture and outputs as the progressive signal.
35
2D20401A | 35 | 26/9/03, 6:03 PM |