JVC BD-X200U manual Turning the Power On & Off Inserting & Removing Discs, Removing a Disc

Preparation
Turning the Power On & Off
	Inserting & Removing Discs

OPERATE indicator
		BUSY
OPERATE		OPEN/CLOSE	OPERATE
OPERATE button
	DVD RECORDER BD-X200	OPTION DV Y/C LINE
		SET UP
AUDIO	TITLECHAPTER		AUDIO
CH1	DOLBY DIGITAL		CH1

LPCM MPEG

CH2 CH2

PHONES	REV	STOP	PLAY	FWD	PAUSE	REC	TOP		SET
								MENU	PHONES
							MENU

	Disc tray
				BUSY
				OPEN/CLOSE
	DVD RECORDER BD-X200			OPTION DV Y/C LINE
				SET UP
	TITLE	CHAPTER
DOLBY DIGITAL
LPCM MPEG
REV	STOP PLAY	FWD PAUSE REC	TOP	SET
			MENU MENU

OPEN/CLOSE indicator OPEN/CLOSE button

Turning the Power On Turning the Power Off

Inserting a Disc Removing a Disc

While in Operate Off mode (i.e., the OPERATE indicator is lit up in red), press the OPERATE button.

●The power will turn on, the color of the OPERATE indicator will change to green, and the DVD recorder will become ready for use. (Operate On mode)

Note A period of 45 seconds may pass before the DVD recorder adopts Operate On mode as it prepares for operation.

 Stop the DVD recorder. (It is recommended that you eject the disc at this time.)

1.	Press the OPERATE button.
	● The DVD recorder will adopt Operate Off mode and the
	color of the OPERATE indicator will change to red.
2.	If the DVD recorder will not be used for an extended
	period of time, disconnect the AC adaptor.
	● Before disconnecting the AC adaptor, be sure to remove
	the power cord from the electrical outlet.

 Press the OPERATE button to activate Operate On mode.
1.	Press the OPEN/CLOSE button.
	● The disc tray will open automatically.
	While the disc tray is open, the OPEN/CLOSE indicator
	will be lit up.

2.	Place the disc on the disc tray.
	Ensure that the disc is inserted correctly into the tray’s recess
	with the printed side facing upward.
	● Carefully place the disc in the tray so as not to hit the front
	panel.

 Stop the DVD recorder.
1.	Press the OPEN/CLOSE button.
	● The disc tray will open automatically.
	While the disc tray is open, the OPEN/CLOSE indicator
	will be lit up.
	● If the current disc has not been finalized, the message
	“NOT FINALIZE” will appear on both the monitor and LCD
	display.

2.	Remove the disc from the disc tray.
	Be sure to wait until the disc tray has opened fully before
	removing the disc.

Notes

●Pressing the OPERATE button will have no effect in Recording mode or Recording Pause mode.

●Pressing this button also has no effect during finalizing, erasing, and dubbing.

3.	Press the OPEN/CLOSE button.
	● The disc tray will close automatically.

3.	Press the OPEN/CLOSE button.
	● The disc tray will close automatically.

Notes

●If the DVD recorder is in either Recording mode or Recording Pause mode, the disc tray will not open when the OPEN/CLOSE button is pressed.

●Pressing this button also has no effect during finalizing,

erasing, and dubbing.

Note			Precautions regarding the disc tray
When a disc is inserted, information about that	disc	is
			● Do not push the disc tray as it is opening or closing.
displayed on-screen. (☞ Page 18)
			● Do not place objects other than discs on the disc tray.
			● Do not press down on the disc tray.

24 25